1. Ergonomic exterior, comfortable handling
LM80 Laser Distance Meter
20 in stock
1. Ergonomic exterior, comfortable handling
₨7,380 ₨9,728
20 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 10 × 6 × 4 cm |
Specifications | LM80 |
Display type | LCD |
Display size | 2.0-inches |
Range | 80m |
Min. display unit | 0.001m |
Measurement units | m/ft/in |
Measurement basis | front/rear |
Accuracy | ±(2mm+5 x 10-5 D) |
Laser class | 2 |
Laser type | 630~670nm, ﹤1mW |
Features | |
Single measurement | √ |
Continuous measurement | √ |
Max/Min/Area | √ |
Volume | √ |
Pythagoras | √ |
Add/Subtract | √ |
Auto leveling horizontal | √ |
Auto leveling vertical | √ |
Data storage | 20 groups |
Auto power off | 3 minutes without operation |
Auto laser off | 30s without operation |
Auto backlight off | 10s without operation |
Tilt angle | ±90.0° |
Audio indication | √ |
Battery status display | √ |
Storage temperature | -20℃~70℃ |
Operating temperature | 0℃~40℃ |
Based on 0 reviews
Be the first to review “LM80 Laser Distance Meter”
-
Analog Multimeters
ANALOG METER YX 960 TR
Features Of YX-960 TR Handheld Analog Multimeter:
- Excellent DC resolution factor of 2mV.
- Expanded resistance measurement from 020 to 200M.
- Series capacitor DC to enable measurement of only AC components.
- A large and bright meteor with a scale length of 80mm.
- The sensitivity of 44pA at full scale.
- Fuse and diode protection.
- Measures hFE of transistor directly.
SKU: n/a -
Clamp Meters
UT281C True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Datahold, backlight, auto power off
SKU: n/a -
Moisture Testers
UT377A Wood Moisture Meter
UT377A is a digital meter designed to measure the moisture content of wood, paper, plywood, and other wooden materials. This device classifies wood into four categories based on material density, and applies temperature compensation algorithm to ensure measurement accuracy. UT377A’s miniature design, low power consumption, and high precision all make this a great product choice for measuring wood moisture content.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.