MRU-30 Earth Resistance and Resistivity Meter
3 in stock
-
It allows to take the measurements of:
- earthing resistance using auxiliary electrodes,
- earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
- earthing resistance using double clamps for measuring multiple earthing without underground connections.
- ground resistivity (Wenner method),
- continuity of equipotential bondings and protective
- conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.
Additionally:
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network
- with frequency 50Hz, 60Hz,
- selection of maximum measuring voltage (25V and 50V),
- introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
- memory of 990 measurements (10 banks of 99 cells each),
- calibration of clamp used,
- data transmission to the computer (USB),
- indication of battery state.
₨0
3 in stock
CompareThe Sonel MRU-30 uses most known methods of earth resistance measurements. Tests can be performed using the 3-pole, 4-pole, 3-pole with auxiliary clamp and also, additionally, the MRU-30 employs the two clamp method of measurement, without the use of auxiliary test rods which can’t be used in some situations. Complementary features of the MRU-30 are measurements of soil resistivity, continuity measurement of protective and equipotential conductors and, using clamps, leakage currents and interference voltages.
- Robust and weatherproof (IP65) – no ingress of dust, water protected by a nozzle against enclosure from any direction.
- Ergonomic casing – small and handy casing to make the measurements more convenient than before.
- Built-in rechargeable battery – saving time to replace flat batteries; can be recharged from Power Bank and Cigarette Lighter Socket!
- Clear on-screen notes – displayed on screen before and after the measurement to alert user of possible dangers and irregularities.
- Many measurement methods available in a small, portable casing
| Weight | 5 kg |
|---|---|
| Dimensions | 20 × 15 × 7 cm |
Measurement of interference voltage UN (RMS)
| Range | Resolution | Accuracy |
| 0…100 V | 1 V | ±(10% m.v. + 1 digit) |
Measurement of continuity of equipotential bondings and protective conductors (Rcont)
measurement range to IEC 61557-4:2007: 0,13 Ω…1999 Ω
| Range | Resolution | Accuracy |
| 0,00…9,99 Ω | 0,01 Ω | ±(2% m.v. + 3 digits) |
| 10,0…99,9 Ω | 0,1 Ω | |
| 100…1999 Ω | 1 Ω |
• measurement current: under short circuit >200mA
• frequency of measurement current: 125 Hz (for networks 50 Hz) and 150 Hz (for networks 60 Hz)
Measurement of earthing resistance (method 3- and 4-pole)
measurement range to IEC 61557-5:2007: 0,53 Ω…9999 Ω (dla 50 V)
| Range | Resolution | Accuracy |
| 0,00…19,99 Ω | 0,01 Ω | ±(3% m.v. + 3 digits) |
| 20,0…199,9 Ω | 0,1 Ω | |
| 200,0…1999 Ω | 1 Ω | ±5% m.v. |
| 2000…9999 Ω | 1 Ω | ±8% m.v. |
• measurement current: under short circuit >20 mA,
• voltage on open terminals: selectable 25 V AC or 50 V AC,
• frequency of measurement current: 125 Hz (for networks 50 Hz) or 150 Hz (for 60 Hz).
Measurement of multiple earthing esistance with using the clamp and auxiliary electrodes (3p + clamp)
| Range | Resolution | Accuracy |
| 0,00…19,99 Ω | 0,01 Ω | ±(3% m.v. + 3 digits) |
| 20,0…199,9 Ω | 0,1 Ω | |
| 200…1999 Ω | 1 Ω | ±5% m.v. |
| 2000…9999 Ω | 1 Ω | ±8% m.v. |
• voltage on open terminals: selectable 25 V AC or 50 V AC,
• measurement current: under short circuit >20 mA,
• frequency of measurement current: 125 Hz (for networks 50 Hz) and 150 Hz (for networks 60 Hz)
Measurement of resistance of auxiliary electrodes RH i RS
| Range | Resolution | Accuracy |
| 0…999 Ω | 1 Ω | ±(5% m.v.+ 8 digits) |
| 1,00k…9,99 kΩ | 0,01 kΩ | |
| 10,0k…19,9 kΩ | 0,1 kΩ |
Measurement of multiple earthing resistance with using double clamps
| Range | Resolution | Accuracy |
| 0,00…19,99 Ω | 0,01 Ω | ±(10% m.v. + 8 digits) |
| 20,0…99,9 Ω | 0,1 Ω | ±(20% m.v. + 3 digits) |
• frequency of measurement current: 125 Hz (for networks 50 Hz) and 150 Hz
(for networks 60 Hz)
Measurement of ground resistivity
Measurement method: Wenner, ρ=2πLRE
| Range | Resolution | Accuracy |
| 0,00…9,99 Ωm | 0,01 Ωm | depending on measurement accuracy RE with 4p method, but not less than ±1 digit |
| 10,0…99,9 Ωm | 0,1 Ωm | |
| 100…999 Ωm | 1 Ωm | |
| 1,00…9,99 kΩm | 0,01 kΩm | |
| 10,0…99,9 kΩm | 0,1 kΩm | |
| 100…999 kΩm | 1 kΩm |
L – distance between probes: 1…50 m.. or 1…150 ft
Electric security:
- type of insulation: double, according to EN 61010-1 i IEC 61557,
- measurement category: CAT III 300V wg EN 61010-1,
- protection class acc. to EN 60529: IP65,
Rated operational conditions:
- operation temperature: -10…+55°C,
- storage temperature: -20…+80°C,
- humidity: 20…90%,
Other technical data:
- LCD display: segment, backlit,
- dimensions: 200x150x74 mm.
Brand
SONEL
Based on 0 reviews
Be the first to review “MRU-30 Earth Resistance and Resistivity Meter”
-
DC Power Supplies
TITAN TN 305DS DC Power Supply
Operating Conditions
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Temperature Coefficient: ≤ 200PPM/°C
Ripple Noise: ≤1 MVRMS(RMS)
Stable CurrentPower Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
The output current is between 0 and nominal value continuously adjustable
SKU: n/a -
Soldering Iron
Mechanic Special Solder Paste XG-50 35G 183°C
This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job.This pack is the right amount of solder paste for most hobby projects. This paste is the replacement for solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste.
SKU: n/a -
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
Related products
-
Earth Ground Resistance Testers
UT521 Earth Groud Testers
UT520 series earth resistance tester hasthe functions of backlight display, low battery display, data hold, datastorage, auto power off and power saving. It can not only be used for accurate three-wiremeasurement but also simple two-wire measurement.
It is applicable to measuring the earthresistance of all kinds of electrical power system, electrical equipment and anti-thunderequipment. It can also measure the earth voltage. It is applicable to testingoperating earth systems of smelting, communication, manufacture, fossil oil,national defense, electricity, chemical industry and construction.
SKU: n/a -
Earth Ground Resistance Testers
UT275 Clamp Earth Ground Testers
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
SKU: 90000 -
Earth Ground Resistance Testers
MRU-21 Earth Resistance Meter
Possible measurements:
- earth resistance measurment with 3-pole method,
- measurement of continuity of equipotential bondings and protective conductors with auto-zero function – with current 200 mA,
- resistance measurement using 2-pole method.
SKU: n/a
There are no reviews yet.