No products in the cart.
-3%
Multimeters
UNI T Bench Top Digital Multimeter UT8803E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
₨57,600 ₨59,600
UNI T Bench Top Digital Multimeter UT8803E
UNI T Benchtop Digital Multimeter UT8802E is a manual range benchtop digital multimeter. This UNI T digital multimeter UT8802E that features 19999 display counts, Large LCD screen with backlight. scale overload protection and unique design. This desktop multimeter UT-8802E can be used to measure AC and DC voltage, AC and DC current, resistance, frequency, capacitance, the transistor, hFE, the diode (LEO), SCR, continuity, etc. This manual relevant safety and warning information.
Brand
UNI T
Based on 0 reviews
Be the first to review “UNI T Bench Top Digital Multimeter UT8803E”
-
-
Process Celibrators
UT725 Multifunction Process Calibrator
Features of UT725 Multifunction Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communication● Simultaneously measure and output different process signal in real time● Pressure measure with specified pressure modules, and sourcing pressure● Provides 24V loop power to transmitter while conducting mA current measurement at the same timeSKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Clamp Meters
TITAN Clamp Multimeter TN88A in Pakistan
Specifications:
- TITAN TN88A Digital Clamp Meter 500V Insulation Tester
- DC voltage: 1000V ± (0.8% + 2)
- AC voltage: 750V ± (1.2% + 4)
- Alternating current: 200A / 1000A ± (2.5% + 5)
- Resistance: 200Ω / 20kΩ ± (1.0% + 2)
- Insulation test 100kΩ to 2000MΩ (with option 500V insulation tester unit)
- High Resistance: 20MΩ / 2000MΩ ± (5.0% + 2)
- The continuity of the alarm
- Low screen voltage
- Data retention
- Input impedance: 10MΩ
- Sampling rate: 3 times / s
- Maximum display: 1999
- Jaw opening: 50mm
SKU: n/a
Related products
-
Multimeters
UT890D Digital Multimeter
Product Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
SKU: n/a -
Multimeters
UT71C Intelligent Digital Multimeters
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
SKU: n/a -
Multimeters
UT18B Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.SKU: n/a
There are no reviews yet.