UT61+ series are reliable true RMS digital multimeters with display counts 6000 (UT61B+/D+) and 22,000 (UT61E+). It can measure up to 1000V AC/DC.
● True RMS
20 in stock
Specifications | Range | UT161B |
Certifications | CE/RoHS/cETLus | |
Safety ratings | CAT III 1000V/CAT IV 600V | |
AC voltage (V) | 1000V | ±(1%+3) |
DC voltage (V) | 1000V | ±(0.5%+3) |
AC current (A) | 10A | ±(1.2%+5) |
DC current (A) | 10A | ±(1%+2) |
Resistance (Ω) | 60MΩ | ±(1%+2) |
Capacitance (F) | 60mF | ±(3%+5) |
Frequency (Hz) | 10MHz | ±(0.1%+4) |
Duty cycle (%) | 0.1%~99.9% | ±(2%+5) |
Display count | 6000 | |
Bandwidth (Hz) | 40Hz~500Hz | |
Analog bar | 31 | |
General Characteristics | ||
Power | 1.5V battery (R03) x 4 | |
Product net weight | 350g | |
Product size | 190mm x 90mm x 50mm | |
Standard accessories | Battery, gold plated test leads, USB cable, English manual | |
Standard individual packing | Gift box, cloth bag | |
Standard quantity per carton | 20pcs | |
Standard carton measurement | 480mm x 370mm x 365mm | |
Standard carton gross weight | 15.2kg | |
Optional accessories | Bluetooth/APP |
₨15,000 ₨18,530
20 in stock
CompareUT61+ series are reliable true RMS digital multimeters with display counts 6000 (UT61B+/D+) and 22,000 (UT61E+). It can measure up to 1000V AC/DC.
● True RMS
Weight | 0.4 kg |
---|---|
Dimensions | 19 × 9 × 5 cm |
Specifications | |
Model | UPO2104E |
Bandwidth | 100MHz |
Channels | 4 |
Sampling rate | 1GS/s |
Memory depth | 56Mpts (single channel) |
Waveform capture rate | 83,000wfms/s |
Time base scale (s/div) | 5ns/div~50s/div |
Input impedance | (1MΩ±2%) II (20pF±3pF) |
Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
Waveform record | 65,000 Frames |
Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code |
Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced |
Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). |
Number of measurements | Display 5 measurements at the same time |
Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements |
Frequency counter | Hardware 6 bits counter (Channels are selectable) |
Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) |
General Characteristics | |
Power | 100V~240VAC, 50Hz/60Hz |
Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution |
Product color | White and grey |
Product net weight | 3.5kg |
Product size | 336mm×164mm×108mm |
Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 450mm×420mm×280mm |
Standard carton gross weight | 9.7kg |
1. Auto power off, the conductor to be measured is greater than 12V
MODEL | 939BD+ |
RATED VOLTAGE | AC 220V±10% 50Hz |
OUTPUT POWER | 75W |
Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 200W±10% |
Withstand voltage and insulation tests | AC1500V 0.4A 60S |
Operating Environment | 0~40℃ relative humidity<80% |
Storage environment | -20~80℃ relative humidity<80% |
Body size | 14.5*12*8CM |
Weight | 2.17KG |
Work voltage | AC 26V±10% 50Hz |
Temperature range | 200℃~480℃ |
Temperature Stability | ±1℃(Static) |
Display Mode | Red LED Digital Display |
Calibration Mode | PID Digitally Programmed Calibration |
PID Temperature Calibration Cycle | 100MS |
Heating Core | Imported High-Powered Heating Core |
Tip-to-Ground Impedance | <2Ω |
Tip-to-Ground Voltage | <2mV |
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.
Wristband design, easy and comfortable to use, doesn’t affect any movement.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Put components on the wristband anytime you want, prevent components from missing.
Strong magentic board is made of permanent magnet, strong magnetism, long service life and efficient adsorption.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Hook and loop strap design, easy and comfortable to wear.
There are no reviews yet.