-10%

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope


27,000 30,000

Compare

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope

  • The automatic waveform mode, normal mode and single mode can be used for the waveform needs of different users.
  • The high-resolution screen provides clear and intuitive display and bright backlight.
  • 2 in 1 function, multimeter + oscilloscope, easy to use and quick measurement, convenient to use.
  • The oscilloscope probe is not needed and the waveform can be measured quickly and accurately.
  • The data waveform holding function in measurement can include 100 records and 50 waveforms.
Category:

Element Type: Oscilloscope Multimeter
Material: ABS

General <75% RHProduct size: approx. 160 x 82 x 30 mm/6.3 x 3.2 x 1.2 in analogue bandwidth 40 MHz Hz vertical resolution 8 bit input resistor approx. 10mQ Vertical Sensitivity Range 500mV/Div-200V/DivVertical Amplitude Accuracy ± (5% + 0.2div) Automatic 0 Reference During DC MeasurementTrigger Level ± 6div) (0.1div Position Setting ± 12div (0.1div per step) Cursor Measurement Function DT, 1/DT (Frequency) Automatic measuring accuracy ± (5% + 0.2div) Observation range 60 x 40 mm input resistance 10 MΩ automatic shut-off 15 minutes or deactivates operating altitude 0 – 2000 m memory capacity 100 DMM data, 50 OSC waveform recordings Storage condition-10 °C -60 °C. <90%. RHWeight: approx. 411g/14.5ozMaximum real-time sample rate 200MSPSNonlinearity ± 1bitIndexingVertical ± 6.0, horizontal 24.0Time Base Range12.5ns/div-10s/divTime Base Accuracy ± (0.01% + 0.1div) Scan ModeAuto/Normal/SingleTrigger Slope Selection. tionRising/Falling EdgeAuto ConfigurationAutomatic timebase and vertical amplitudeAutomatic measuring functionVp-p, Vavg, VrmsRecord Length24.0divAnalogue bandwidth up to 40 MHz refers to the bandwidth when the voltage is damped to 3 dB. If the input signal is disturbed, use a conversion plug and a special shielded high frequency wire. The vertical damping is 1-2-5 range switching

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope”

There are no reviews yet.

  • Et-8908 Intelligent Multimeter Precise Auto-sensing Capacitance Voltage

    0 out of 5
    (0)

    Et-8908 Intelligent Multimeter Precise Auto-sensing Capacitance Voltage

    SKU: n/a
  • JM-Z20 Plastic Components Storage Box

    0 out of 5
    (0)

    Features: 

    • Product made of PP plastic.
    • Dismountable inner lining with different sizes can meet all your storage needs.
    • Two-layer design, make full use of space.
    SKU: n/a
  • UNI-T UT3513 DC Resistance Tester Microohmmeter 4.3 Inch LCD Screen Cable/Coil/Motor Resistance Test

    0 out of 5
    (0)
    Model UT3513
    Resistance range 20m Q/200m Q/2Q/20Q /200 Q/2kQ/20kQ
    Resolution 1 u Q/10 u Q/100 u Q/lmO/lOmQ/lOOmQ/1 Q/10Q/100Q
    Test current 1A/1A/100mA/10mA/1mA/1mA/100 uA/10 u A/l uA
    Testing terminal opencircuit voltage <1V/<1V/<1V/<1V/<5V/<5V/<5V/<5V/<3V/
    Measured parameter DC resistance
    Basic accuracy Slow: 0. 1%; Medium: 0. 2%
    Maximum reading 22000
    Range mode Auto/Manual/nominal
    Calibration Short-circuit full range zeroing
    Sorting function 3types of resistance and voltage input: exceeds upper limit/exceeds lower limit/within the range,2 types of sorting result output: PASS/FAIL
    Comparing method Absolute tolerance, percentage tolerance, direct-reading comparison
    Trigger mode Internal, external
    Test terminal Four-terminal measurement
    Button functions Lock 一一 keyboard lock, OK 一一 screenshot
    System setup Language: Chinese/English, key tone setting
    Interfaces & protocols Handler interface, RS232, USB DEVICE and USB HOST communication interface,SCPI and Modbus protocol
    Upper computer software V
    Power AC 100~240V 50/60Hz
    Display 4.3-inches LCD
    SKU: n/a
  • UT353-BT Mini Sound Level Meter

    0 out of 5
    (0)

    1. White backlight, clear LCD screen

    2. Adjustable sampling rate, fast/slow
    3. 1/2 inch condenser microphone
    4. Light weight, ergonomic design, user-friendly interface
    SKU: n/a
  • YH 852D+ REWORK STATION

    0 out of 5
    (0)

    Features:

    1. Hot air and hot iron 2in1 rework soldering station
    2. Dual LED digital displays to show precision temperature
    3. SAMSUNG microcomputer control, quick warming-up
    4. Adjust the airflow and temperature control rotation easily
    5. Intelligence cool airflow features long service life of the machine and safe personal operation
    6. Automatically stop rotation
    7. ESD design of soldering iron to protect sensitive components
    8. High-quality resistance for durable use
    9. Stainless steel holder for placing the hot air gun
    10. Plastic stand for keeping the iron from flammable materials
    11. Voltage: 200V  to 240V 50/60Hz AC
    SKU: n/a