-9%

UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope


  • 100MHz bandwidth
  • number of channels 2
  • sampling 1GS / s
  • max memory depth 56Mpts (per channel) (previously 28Mpts per channel)
  • waveforms per second up to 80,000 wfms/s (formerly 50,000 wfms/s)
  • time base range 5ns/div – 50s/div
  • input coupling (1MΩ ± 2%) // (20pF ± 3pF)
  • verical axis 1mV/div – 20V/div (1MΩ)
  • DC gain accuracy ± 3%
  • number of saved waveforms 65000
  • trigger : Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup / Hold, Pulse Width, Slope, Video, Pattern, RS232 / UART, I2C, SPI
  • mathematical operations with waveforms : A + B, A-B, AxB, A / B, FFT, Logic operation, Editable Advanced, Filter
  • automatic Measurement : Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Cycle Area, OverShoot, PreShoot, Period, Freq, Rise, Fall, + Width, -Width, + Duty, -Duty, RiseDelay, FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
  • number of measurements : 5 simultaneous measurements
  • statistics : Mean, Max, Min, standard deviation, number of measurements
  • frequency counter : 6 bits
  • standard interfaces : USB-Host, USB-Device, LAN, AUX (Trig Out, Pass / Fail)

154,800 170,610

Compare

UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope

The UPO2102E oscilloscope is a digital oscilloscope with Ultra Phosphor technology from the UPO2000E series. The UPO2102E oscilloscope offers 2 channels with the same characteristics. It is also equipped with sampling rate of 1 GS/s. This is amply sufficient for a bandwidth that is 100 MHz (unlike the lower versions of UPO2072CS, UPO2074CS, UPO2072E and UPO2074E, which are only up to 70 MHz). It is a multifunctional, high-performance oscilloscope that is easy to use, with very good technical specifications. It features a 800 x 480 pixel display. Supports USB storage and PC communication via Plug and play USB. Compared to the previous version UPO2102CS differs in new software (firmware).

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope”

There are no reviews yet.

  • UT309A Professional Infrared Thermometer

    0 out of 5
    (0)

    Features

    1. 3m drop proof, IP65

    2. Large LED display with backlight

    3. MAX/MIN/AVG/DIF mode

    4. High/Low temperature alarm with LED indication

    5. Lock measurement

    6. Data hold/auto power off function

    SKU: n/a
  • TDGC 500VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=2
    Copper Wind
    LCD Output Display

    SKU: n/a
  • Ut8805e Benchtop Digital Multimeter 5 1/2 Digits Digital Multimeter

    0 out of 5
    (0)
    Features
    1. True 5½-digit reading resolution
    2. Up to 5k rdgs/s sampling rate
    3.Multiple mathematical operations
    4. True-RMS,AC voltage range:750V,AC current range:10A
    5. Built-in thermocouple cold junction compensation
    6. Arbitrary sensor measurement
    7. 1Gb flash memory storage which can support up to 10k data recall
    8. With 4.3 inches TFT LCD. Pass/Fail
    9. Support USB, GPIB, RS-232C and LAN interface; support USB-TMC, IEEE 488.2 standard, VXI11 and SCPI language
    SKU: n/a
  • CLAMP METER AC DC CM 2056

    0 out of 5
    (0)

    Technical data

    Basic function

    Range

    Accuracy

    DCV

    400mV/4V/40V/400V/1000V

    ±(0.5%+5)

    ACV

    400mV/4V/40V/400V/750V

    ±(1.0%+5)

    DCA

    400A/1000A

    ±(2.0%+5)

    ACA

    400A/1000A

    ±(2.0%+5)

    Resistance

    400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ

    ±(0.8%+3)

    Capacitance

    4nF/40nF/400nF/4uF/40uF/200uF

    ±(3.5%+8)

    Frequency

    100Hz/1kHz/10kHz/100kHz/1MHz/10MHz

    ±(0.5%+4)

    Temperature

    (-40~ 1000) ℃ / (-40 ~1832) ℉

    ±(1.0%+5)

    Special function

    CM-2056

    NCV test

    True RMS test

    Diode test

    Continuity test

    Less than 50Ω±10Ω

    Low battery indicator

    Approx. less than 2.4 V

    Data hold

    Auto power off

    About 15 minutes

    Function protection

    Clamp light

    Backlight display

    Input impedance

    10MΩ

    Sampling rate

    3 times/s

    AC frequency response

    Current 50-60Hz/ voltage 50-400Hz

    Operation method

    Auto or manual range

    Max display

    4000

    Clamp opens

    52mm

    Battery

    3V (2*AAA battery)

    General Characteristic

    Meter color

    Orange and Black

    Meter weight

    About 280g (including battery)

    Meter size

    270×123×50mm

    Standard accessory

    Test leads, battery, manual, TP01 temperature probe

    SKU: n/a
  • JM-8132 45 in 1 Screwdriver Ratchet Hand-tools

    0 out of 5
    (0)

    Features:

    1. 45-in-1 interchangeable precise manual tool set
    2. Durable CR-V bit meets all daily needs
    3. Non-slip tough shaft ensures greater comfort and convenience
    4. Professional portable hardware tools with perfect weight & compact design for easy carry
    SKU: n/a