-1%

UNI-T MSO2204-S Oscilloscope


545,000 550,000

Compare

The UNI-T MSO2204-S is a multi-function digital phosphorus oscilloscope, with 4 analog channels and 16 digital, a bandwidth of 200 MHz and a maximum sample rate of 2 GSa/s in the analog and 1 GSa/s in the digital channels. It presents three-dimensional waveform data of amplitude, time and signal intensity. This data can then be manipulated by the touchscreen, allowing a variety of gesture operations such as click, slide, zoom, edit and drag.

Features a logic analyser, which can be used for parallel bus, protocol decoding and timing measurement. Furthermore, it has a built in function / arbitrary waveform generator, capable of dual channel 50 MHz output. The activation software required for this feature is included with the product.

With a maximum waveform capture rate of 1.000.000 wfm/s and with a maximum memory depth of 56 Mpts per channel, this oscilloscope is considered fast and highly accurate in capturing abnormal waveforms.

This product has a 4 Mpts FFT (allowing measurement of the frequency domain spectrum of the incoming signals), supporting frequency settings, waterfall diagrams, area triggers, detection settings and mark measurements. The multiscopes technology allows for a split screen waveform display.

The oscilloscope has a built-in webserver, with which the oscilloscope can be accessed and remotely controlled via internet, through both PC and mobile phone interfaces.

Category:

Specifications
Memory depth max. 56 Mpts (divided by number of active channels)
Sample rate max. 2 GS/s
Waveform capture rate 200.000 wfm/s (1.000.000 wfm/s in Fast Acquire mode)
Vertical resolution 8 bits
Vertical scale 500 µV/div – 20 V/div
Interfaces USB Host/Device, LAN, EXT Trigger, Aux Out (Pass/Fail, Trigger Out), VGA, signal source output interface (MSO-2xxx-S only)
Decoding options RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay
Display 8″ TFT LCD (800×480)
Dimensions 370 x 185 x 115 mm
Weight 4.5 kg

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI-T MSO2204-S Oscilloscope”

There are no reviews yet.

  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • MC TIP 900M TFS

    0 out of 5
    (0)
    SKU: n/a
  • A 830L DMM

    0 out of 5
    (0)
    SKU: n/a
  • ET 8102 DMM

    0 out of 5
    (0)

    Specifications:
    Model:ET8102
    Display:5999 Counts
    Color:Black
    DC Voltage:6V/60V/600V±(0.5%+3),1000V±(0.8%+10)
    AC Voltage:6V/60V/600V±(0.8%+3),750V±(1.2%+10)
    DC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
    AC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
    Resistance:600Ω±(0.8%+5),6KΩ/60KΩ/600KΩ/6MΩ±(0.8%+3),40MΩ±(2.5%+3)
    Capacitance:60nF/600nF/6μF/60μF/600μF±(3.5%+20),6mF/30mF±(5.0%+3)
    Frequency:10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz±(0.1%+3)
    Temperature:-20℃~1000℃,±(1.0%+5)<400℃,±(1.5%+15)≥400℃
    0℉~1832℉,±(0.75%+5)<750℉,±(1.5%+15)≥750℃
    NCV test:Yes
    Zero line/fire wire:Yes
    Duty cycle:Yes
    Diode test:Yes
    Continuity testing:Yes
    Backlight:Yes
    Date hold:Yes
    True RMS:Yes
    Max/Min value measurement:Yes
    Flashlight:Yes
    Auto power off:Yes
    Low battery indication:Yes
    Over range indication:Yes
    Power:2 x 1.5V AAA Battery (not included)
    Product Size:142 x 68 x 32 mm
    Product Net Weight:187g

    Package Information:
    Package Size:16.5 x 10 x 5cm / 6.5 x 3.9 x 2in
    Package Weight:295g / 10.4 oz

    Package list:
    1 x Digital Multimeter
    2 x Test Leads Pens
    1 x User Manual
    • 1.Multifunction:Can measure AC/DC voltage,AC/DC current,resistance,capacitance,
    • 2.Portable design:Small and can be put into pocket,easy to carry.
    • 3.Wide range of applications:It’s a perfect tool for the laboratory,factory and home.
    • 4.Easy to use & clear to read:With large LCD backlight display and flashlight function,convenient to read data in dark.
    • frequency,duty cycle,temperature,NCV,diode,continuity,zero line/fire wire.

    SKU: n/a
  • TDGC 1000VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=4
    Copper Wind
    LCD Output Display
    Three Pin Output Socket

    SKU: n/a
  • YH 08C TIP CLEANER

    0 out of 5
    (0)
    SKU: n/a