The UNI-T MSO2204-S is a multi-function digital phosphorus oscilloscope, with 4 analog channels and 16 digital, a bandwidth of 200 MHz and a maximum sample rate of 2 GSa/s in the analog and 1 GSa/s in the digital channels. It presents three-dimensional waveform data of amplitude, time and signal intensity. This data can then be manipulated by the touchscreen, allowing a variety of gesture operations such as click, slide, zoom, edit and drag.
Features a logic analyser, which can be used for parallel bus, protocol decoding and timing measurement. Furthermore, it has a built in function / arbitrary waveform generator, capable of dual channel 50 MHz output. The activation software required for this feature is included with the product.
With a maximum waveform capture rate of 1.000.000 wfm/s and with a maximum memory depth of 56 Mpts per channel, this oscilloscope is considered fast and highly accurate in capturing abnormal waveforms.
This product has a 4 Mpts FFT (allowing measurement of the frequency domain spectrum of the incoming signals), supporting frequency settings, waterfall diagrams, area triggers, detection settings and mark measurements. The multiscopes technology allows for a split screen waveform display.
The oscilloscope has a built-in webserver, with which the oscilloscope can be accessed and remotely controlled via internet, through both PC and mobile phone interfaces.
Specifications
Memory depth max. 56 Mpts (divided by number of active channels)
Sample rate max. 2 GS/s
Waveform capture rate 200.000 wfm/s (1.000.000 wfm/s in Fast Acquire mode)
Vertical resolution 8 bits
Vertical scale 500 µV/div – 20 V/div
Interfaces USB Host/Device, LAN, EXT Trigger, Aux Out (Pass/Fail, Trigger Out), VGA, signal source output interface (MSO-2xxx-S only)
Decoding options RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay
Display 8″ TFT LCD (800×480)
Dimensions 370 x 185 x 115 mm
Weight 4.5 kg
Brand
UNI T
Based on 0 reviews
Be the first to review “UNI-T MSO2204-S Oscilloscope”
-
Environment Meters
UT362 Anemometer
1. Data hold, LCD backlight
2. ℃/℉ selectable3. Auto power off (cancelable)4. 2044 sets data storage5. Auto record function with 0 .5~255s interval6. Wearproof fan shaft for improved accuracy and reliability7. Wind speed modes: MAX, MIN, Real-time8. Wind count modes: MAX, 2/3 MAX, MIN, AVG, real-time9. 7 selectable units: m/s, km/h, ft/min, MPH, KNOTS, CFM, CMMSKU: n/a -
Soldering Station
YH 937D SOLDERING STATION
Features Of Adjustable Temperature Digital Soldering Rework Station YH937D:
- Extremely low noise
- ESD design of soldering iron to protect sensitive components
- LED display to show precision real temperature
- Ventilations on the sides for heat radiation
- Quick warm-up and stabilized temperature
- Agile and light handle suitable for comfortable long time use
- Plastic Stand for keeping the iron from flammable materials
- Dampened sponge to wipe the soldering tips at times
- Free 5 Tips for more convenience operation
- Lightweight and space-saving
- Suitable for mounting and reworking SMD components by hand
SKU: n/a
Related products
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Oscilloscopes
Digital Storage Oscilloscope UTD2202CM
Specifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host，USBDevice，Pass/Fail
13. 7-inch TFT LCD，WVGA (800*480)
SKU: n/a -
Oscilloscopes
UNI-T MSO3152E 150MHz Mixed Signal 2 Channel Digital Oscilloscope
Analog bandwidth 150MHz 250MHz Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels) Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) Memory depth 70Mpts Waveform capture rate 200,000wfms/s Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display ) Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall] Input impedance (1MΩ±1%) II (20pF±3pF) Input impedance digital (101kΩ±1%) II (9pF±1pF) Vertical scale 1mV/div~20 V/div (1 MΩ) DC gain accuracy <5mV: ±3%, ≥5mV: ±2% Waveform record 100,000 frames Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
CAN, LIN, FlexRayBus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations Auto measurements
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
-Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→AMeasurement display 5 types Measurement statistics Average, Max, Min, standard deviation and number of measurements Frequency counter 6 bits Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA Standard Accessories
USB interface cable UT-D14 Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06 Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05 16CH Logic analyzer probe UT-15M SKU: n/a
There are no reviews yet.