-2%

UNI-T MSO3254E 250MHz Mixed Signal 4 Channel Digital Oscilloscope


Analog bandwidth 150MHz 250MHz
Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
Memory depth 70Mpts
Waveform capture rate 200,000wfms/s
Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
Input impedance (1MΩ±1%) II (20pF±3pF)
Input impedance digital (101kΩ±1%) II (9pF±1pF)
Vertical scale 1mV/div~20 V/div (1 MΩ)
DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
Waveform record 100,000 frames
Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
CAN, LIN, FlexRay
Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
 

 

Auto measurements

Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
-Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
Measurement display 5 types
Measurement statistics Average, Max, Min, standard deviation and number of measurements
Frequency counter 6 bits
Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
 

 

Standard Accessories

USB interface cable UT-D14
Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
16CH Logic analyzer probe UT-15M

 

500,000 510,000

Compare

UNI-T MSO3254E 250MHz Mixed Signal 4 Channel Digital Oscilloscope

Mixed Signal Oscilloscope is based on UNI-T’s unique Ultra Phosphor technology. A multifunctional, high-performance oscilloscope that is easy to use, with excellent technical specifications, and a perfect combination of many functionalities that help users to quickly complete testing.

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI-T MSO3254E 250MHz Mixed Signal 4 Channel Digital Oscilloscope”

There are no reviews yet.

  • CLAMP METER AC DC CM 2056

    0 out of 5
    (0)

    Technical data

    Basic function

    Range

    Accuracy

    DCV

    400mV/4V/40V/400V/1000V

    ±(0.5%+5)

    ACV

    400mV/4V/40V/400V/750V

    ±(1.0%+5)

    DCA

    400A/1000A

    ±(2.0%+5)

    ACA

    400A/1000A

    ±(2.0%+5)

    Resistance

    400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ

    ±(0.8%+3)

    Capacitance

    4nF/40nF/400nF/4uF/40uF/200uF

    ±(3.5%+8)

    Frequency

    100Hz/1kHz/10kHz/100kHz/1MHz/10MHz

    ±(0.5%+4)

    Temperature

    (-40~ 1000) ℃ / (-40 ~1832) ℉

    ±(1.0%+5)

    Special function

    CM-2056

    NCV test

    True RMS test

    Diode test

    Continuity test

    Less than 50Ω±10Ω

    Low battery indicator

    Approx. less than 2.4 V

    Data hold

    Auto power off

    About 15 minutes

    Function protection

    Clamp light

    Backlight display

    Input impedance

    10MΩ

    Sampling rate

    3 times/s

    AC frequency response

    Current 50-60Hz/ voltage 50-400Hz

    Operation method

    Auto or manual range

    Max display

    4000

    Clamp opens

    52mm

    Battery

    3V (2*AAA battery)

    General Characteristic

    Meter color

    Orange and Black

    Meter weight

    About 280g (including battery)

    Meter size

    270×123×50mm

    Standard accessory

    Test leads, battery, manual, TP01 temperature probe

    SKU: n/a
  • UT347A Leeb Hardness Tester

    0 out of 5
    (0)

    Features of UT347A Leeb Hardness Tester

    Certificates: CE (In processing), UKCA

    ● 6 kinds of hardness values (HL, HB, HRC, HRB, HV, HS) is a real-time measurement
    ● One hardness tester can be equipped with 7 different impact devices
    ● Automatic identification without calibration when replacing impact device
    ● Statistical, multi-unit, line chart, histogram 4 measurement modes
    ● Camera: 640×480 pixels (900 BMP format pictures could be stored)
    ● Automatic alarm when the upper and lower limits are exceeded
    ● Adjustable backlight brightness
    ● Mobile phone Bluetooth APP and PC software analysis data
    ● Support thermal printing
    ● Tri-color LED indication and LED flashlight
    SKU: n/a
  • UT233 Digital Power Clamp Meters

    0 out of 5
    (0)

    UT 230 series is a handheld intelligent power clamp meter, which combines with digital current meter and power meter. It is equipped with powerful measurement and data processing software, which can help complete measurements, calculations and displays of voltage, current, active power, power factor, phase angle, apparent power, reactive power, power, frequency, temperature and other parameters.

    SKU: n/a
  • SVC 5000VA

    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
  • UT201+ ACA Digital Clamp Meters

    0 out of 5
    (0)

    1. Auto range and 3/s sampling rate

    2. Data hold

    3. Max value hold

    4. Auto power off

    5. Low battery prompt, over-range prompt and auto polarity display

    6. Comfortable tohold and easy to carry with (Product weight: 220g)

    7. 1m drop proof

    8. Complies with Double Insulationand Over Voltage standards of CAT II 600V, CAT III 300V and Pollution Degree 2

    9. Complies with CE (European Union) directives

    SKU: n/a
  • SOLDERING IRON WOOD 300W BLUE

    0 out of 5
    (0)

    SOLDERING IRON WOOD 300W BLUE

    SKU: n/a