Device color: White
Temperature range: Indoor & Outdoor -50 ~ +70 degree (-58 ~ +158degF)
Humidity range: 10% ~ 99% RH
Humidity accuracy: -/+10% RH
Power supply: 1.5V*1 (AAA size)
Device dimension: 10.5*9.8*2.4cm
HTC-2 cable length :1.5meter
Feature:
1. Temperature and Humidity Functions: With temperature range from -10 °C to +50 °C and humidity 10 % ∼ 99 % RH,
temperature and humidity readings show directly.
2. Time Function: Besides the basic time display, these item also has alarm clock and calendar display (month and
date).
3. Memory Function: When pushing the button MEMORY , it could display the memory of temperature and humidity
AC DIGITAL CLAMP METER KEW 2117R
• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
60/600/1000A auto-ranging
• Long battery life
• Safety Standard
IEC 61010-1 CAT IV 300V / CAT III 600V
Technical data
|
Basic function |
Range |
Accuracy |
|
DCV |
400mV/4V/40V/400V/1000V |
±(0.5%+5) |
|
ACV |
400mV/4V/40V/400V/750V |
±(1.0%+5) |
|
DCA |
400A/1000A |
±(2.0%+5) |
|
ACA |
400A/1000A |
±(2.0%+5) |
|
Resistance |
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ |
±(0.8%+3) |
|
Capacitance |
4nF/40nF/400nF/4uF/40uF/200uF |
±(3.5%+8) |
|
Frequency |
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz |
±(0.5%+4) |
|
Temperature |
(-40~ 1000) ℃ / (-40 ~1832) ℉ |
±(1.0%+5) |
|
Special function |
CM-2056 |
|
NCV test |
√ |
|
True RMS test |
√ |
|
Diode test |
√ |
|
Continuity test |
Less than 50Ω±10Ω |
|
Low battery indicator |
Approx. less than 2.4 V |
|
Data hold |
√ |
|
Auto power off |
About 15 minutes |
|
Function protection |
√ |
|
Clamp light |
√ |
|
Backlight display |
√ |
|
Input impedance |
10MΩ |
|
Sampling rate |
3 times/s |
|
AC frequency response |
Current 50-60Hz/ voltage 50-400Hz |
|
Operation method |
Auto or manual range |
|
Max display |
4000 |
|
Clamp opens |
52mm |
|
Battery |
3V (2*AAA battery) |
General Characteristic
|
Meter color |
Orange and Black |
|
Meter weight |
About 280g (including battery) |
|
Meter size |
270×123×50mm |
|
Standard accessory |
Test leads, battery, manual, TP01 temperature probe |
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
1. Features of UT332+ Temperature Humidity Meter
● ℃/℉ selection
The UT714 is powerful temperature calibrator that sources and measures thermocouples, RTDs, voltage, and resistance. It can be used to test and calibrate diffrent types of temperature instruments. This device is suitable for testing input/output temperature terminals such as sensors and transmitters.
DT 700D DMM 
Clamp Meter BM 820A 
YTH8 Plier Press Terminals Wire Crimp Ferrule Crimp Tools Crimper Plier 
There are no reviews yet.