TKF-12 Phase Sequence Tester
1 in stock
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.
₨19,741 ₨22,376
1 in stock
CompareThe TKF-12 tester is a modern high-quality, simple and safe device. However it is recommended to get acquainted with he present manual in order to avoid measuring errors and prevent possible problems related to operation of the meter.
| Weight | 0.4 kg |
|---|---|
| Dimensions | 13 × 7 × 4 cm |
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.
Electric security:
- type of insulation: double, according to EN 61010 – 1
- measurement category: CAT III 600 V acc. to EN 61010 – 1
- protection class acc. to EN 60529: IP42
Rated operational conditions:
- rated phase-to-phase voltage range: 120…690 V AC
- maximum operation phase-to-phase voltage: 760 V AC
- frequency range: 10…70 Hz
- operating temperature: -10…+45°C
- storage temperature: -20…+60°C
Other technical data:
- power supply: from the tested electrical installation, up to 15 min for max. voltage
- dimensions: 130 x 70 x 35 mm
- weight (without test leads): approx. 200g
Brand
SONEL
Based on 0 reviews
Be the first to review “TKF-12 Phase Sequence Tester”
-
Multimeters
Ut8805e Benchtop Digital Multimeter 5 1/2 Digits Digital Multimeter
Features 1. True 5½-digit reading resolution
2. Up to 5k rdgs/s sampling rate
3.Multiple mathematical operations
4. True-RMS,AC voltage range:750V,AC current range:10A
5. Built-in thermocouple cold junction compensation
6. Arbitrary sensor measurement
7. 1Gb flash memory storage which can support up to 10k data recall
8. With 4.3 inches TFT LCD. Pass/Fail
9. Support USB, GPIB, RS-232C and LAN interface; support USB-TMC, IEEE 488.2 standard, VXI11 and SCPI languageSKU: n/a -
Tool Kits
JM SK05
Feature:
PVC plastic material, environmental friendly, not easy to deformation, high oil-resistant and corrosion-resistant.
Brand new and high quality.
Suitable for screen separation of mobile phones and tablets.
ABC industrial plastic material, more durable and higher deformation-resistant than usual plastic.
Heavy duty suction cup.
Can be reused many times.
Used to remove phone and tablet glass panels.
Ergonomic design,easy to use.SKU: n/a -
Digital Multi Meter
18B WINHY DMM
Description
Features:
Multifunction:Can accurately measure AC/DC voltage, AC/DC current,resistance,capacitance,frequency,diode,LED test and continuity testing.
Portable Design:There is a back bracket for supporting multimeter,and also can collect test probe for your convenience.
Widely use:It’s perfect tool for the laboratory,factory and electricity.
Easy to Use & Clear to Read:With large LCD Backlight display,convenient to use and read.
More advantages:Auto power off,range,select,True RMS,data hold,over range indication and low voltage display.SKU: n/a
Related products
-
Multimeters, Phase Detector Meters
UT261B Phase Sequence and Motor Rotation Indicator
UT261 series is used for determining 3-phase power phase sequence, missing phase indication, and motor phase rotation (UT261B). UT261A and UT261B can measure AC voltage of 40~700V and 90~600V respectively. These devices can operate in frequency range of 15~400Hz. UT261 are durable devices which can withstand impact from 2 meter’ s height. Test leads with protective tubing are included in optional accessories.
SKU: n/a -
Phase Detector Meters
UT262A Non-Contact Phase Detector
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
SKU: 22000
There are no reviews yet.