-36%

JM 8171 TOOL KIT


Minimum Order Quantity: 40

JM 8171 mini electric screwdriver set can be used to repair and disassemble precision digital products and household products. Mini electric screwdriver set has its new and unique research and developed design, which creates the apex of technology.

2,812 4,360

Compare

17 In 1 Portable DIY Electronic Maintenance Mini Screwdriver Set JM-8171

Category:

Brand

JAKEMY TOOLS

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “JM 8171 TOOL KIT”

There are no reviews yet.

  • UT890C+ TRMS Digital Multimeter

    0 out of 5
    (0)

    1.6000 Counts; Measure voltage and current RMS.

    2.The capacitance slot has REL function. Range is from 1pF to 99.99mF
    3.The device can measure frequency of high accuracy. The min resolution is 0.001Hz

    4.It has special functions: MAX/MIN and MAX-MIN
    5.The min DC and AC resolution is 0.01μA and 1μA. The max range is 20A.
    6.It can measure diode  whose voltage drop is up to 3V .So it is very suitable to measure LED.
    7.It has functions: hold, power off and backlight.
    8.It also measure temperature ℃ and ℉

    SKU: n/a
  • MECHANIC Industrial Triocular stereo microscope MC75T-B3

    0 out of 5
    (0)

    Binocluar magnification(7X-45X/2.1X-180X)

    Eyepiece(WF10X/20MM,WF20X/10MM)

    Objectlens(10.6X-5.5X),

    Aux(0.3X/287,0.5X/165,0.7X/120,1.5X/45,2X/30)

    Continuourszoom(0.7X-4.5X)

    SKU: n/a
  • ANALOG METER YX 960 TR

    0 out of 5
    (0)

    Features Of YX-960 TR Handheld Analog Multimeter:

    • Excellent DC resolution factor of 2mV.
    • Expanded resistance measurement from 020 to 200M.
    • Series capacitor DC to enable measurement of only AC components.
    • A large and bright meteor with a scale length of 80mm.
    • The sensitivity of 44pA at full scale.
    • Fuse and diode protection.
    • Measures hFE of transistor directly.
    SKU: n/a
  • LM50D Laser Distance Meter (Curvature Edition)

    0 out of 5
    (0)

    1. Ergonomic exterior, comfortable handling

    2. Millimeter accuracy
    3. Large, HD display
    4. Auto voice and audio indication
    5. Curvature measurement, test curve length via the roller
    6. Auto power off after 3 minutes without operation
    7. Convenient angle measurement via electronic leveling
    SKU: n/a
  • UT278A Clamp Earth Ground Testers

    0 out of 5
    (0)

    UT270 series is widely used in earth ground and circuit resistance measurements of electric power, telecommunications, meteorology, oil field, construction and industrial electrical equipment. It can measure the ground system of the circuit without disconnecting grounding wires, auxiliary electrode. UT278A can also measure leakage current and neutralline current of earth ground system
    .

    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a