-3%

UNI T Bench Top Digital Multimeter UT8803E


  1. 20,000 Count EBTN LCD Display
  2. DC Voltage: 200mV/2V/20V/200V/1000V
  3. AC Voltage: 2V/20V/200V/750V
  4. DC Current: 200μA/2mA/20mA/200mA/20A
  5. AC Current: 2mA/20mA/200mA/20A
  6. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
  7. Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
  8. Frequency: 200Hz~10MHz
  9. Duty cycle: 5%~99%
  10. Frequency response: 1 kHz
  11. USB Interface
  12. Data hold
  13. MAX/MIN
  14. Continuity buzzer
  15. Diode/transistor
  16. test
  17. CAT II 600V

57,600 59,600

Compare

UNI T Bench Top Digital Multimeter UT8803E

UNI T Benchtop Digital Multimeter UT8802E is a manual range benchtop digital multimeter. This UNI T digital multimeter UT8802E that features 19999 display counts, Large LCD screen with backlight. scale overload protection and unique design. This desktop multimeter UT-8802E can be used to measure AC and DC voltage, AC and DC current, resistance, frequency, capacitance, the transistor, hFE, the diode (LEO), SCR, continuity, etc. This manual relevant safety and warning information.

 

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI T Bench Top Digital Multimeter UT8803E”

There are no reviews yet.

  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • TITAN TN 305DS DC Power Supply

    0 out of 5
    (0)

    Operating Conditions

    Supply power: AC 220-240V, 50Hz/60Hz.

    Working Temperature: -10°C ~ 40 °C

    Relative Humidity: ‹ 90%

    Storage Conditions: -10°C ~ 40 °C

    Relative Humidity: ‹ 80%

    Stable Voltage

    The output voltage is between 0 and nominal value continuously adjustable

    Voltage Stability: ≤0.01% +2mV

    Load Stability: ≤ 0.01% +2mV

    Recovery Time: ≤100µS

    Temperature Coefficient: ≤ 200PPM/°C

    Ripple Noise: ≤1 MVRMS(RMS)
    Stable Current

    Power Stability: 0.1% + 3mA

    Load Stability: 0.2% + 3mA

    Ripple Noise : ≤2mArms(RMS)

    The output current is between 0 and nominal value continuously adjustable

    SKU: n/a
  • LM 120 Laser Distance Meters (Discontinued)

    0 out of 5
    (0)

    Features of LM Series Laser Distance Meters

    Certifications: RoHS

    ●Ergonomic exterior, comfortable handling

    ●Millimeter accuracy
    ● Large, multiple angle HD display
    ●Quick, auto calculation with real-time readout
    ●Physical leveler
    ●Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
    ●Auto power off after 3 minutes without operation
    SKU: n/a