UT695D-10 includes optical power meter, visual fault locator, flashlight, and remote cable tester. UT695D-10 is used for optical signal power measurement, optical fiber line loss test, optical device insertion loss test, optical fiber fault detection, optical fiber breakpoint location, end-to-end optical fiber identification and more. Designed with IP54 dust and water prevention function, UT695D-10 can be applied to optical cable construction and maintenance, optical fiber communication, optical fiber sensing, optical CATV and other fields.
UT 695D-10 Optical Multimeter
4 in stock
Specifications | ||
Model | Description | |
Optical power meter | Wavelength range | 800nm~1700nm |
Calibrated wavelength | 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm | |
Measurement range | -70~3dBm | |
Uncertainty | ±5% | |
Display resolution | Linear: 0.1%, logarithmic: 0.01dBm | |
Connector | FC/SC/ST | |
Detector type | InGaAs | |
Visual fault locator | Wavelength | 650nm±10nm |
Power | 10mW (measurable optical fiber length: approximately 8~10km) | |
Mode | Continuous/Pulse | |
Connector | FC/SC/ST | |
Flashlight | √ | |
LAN cable sequence test | Line sequence measurement (LED1~8, LED_G) | |
General Characteristics | ||
Power | 1050mAh rechargeable battery | |
Display | 42mm x 33mm | |
Product color | Red and grey | |
Product net weight | 168g | |
Product size | 132mm x 68mm x 31mm | |
Standard accessories | USB cable | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 10pcs | |
Standard carton measurement | 305mm x 270mm x 130mm | |
Standard carton gross weight | About 2.7kg |
₨11,100 ₨13,080
4 in stock
CompareWeight | 0.2 kg |
---|---|
Dimensions | 13 × 7 × 3 cm |
Based on 0 reviews
Be the first to review “UT 695D-10 Optical Multimeter”
-
Tools and Hardware
JM X4 Magnetic Watch
Wristband design, easy and comfortable to use, doesn’t affect any movement.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Put components on the wristband anytime you want, prevent components from missing.
Strong magentic board is made of permanent magnet, strong magnetism, long service life and efficient adsorption.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Hook and loop strap design, easy and comfortable to wear.SKU: n/a -
Arbitary Waveform Generator
UTG2122B Function/Arbitrary Waveform Generator
Specifications UTG2122B Max frequency 120MHz Channels 2 Sampling rate 320MS/s Waveforms Sine, square, ramp, pulse, noise, DC, arbitrary; UTG2000B only: harmonic Working modes Output on/off, continuous, modulation, sweep, burst Modulations AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM Arbitrary Waveform Length 8pts~16Mpts Vertical resolution 16 bits (symbol included) Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~25MHz Pulse 1μHz~20MHz Ramp 1μHz~3MHz Harmonic 1μHz~30MHz Arbitrary 1μHz~15MHz Noise 60MHz (-3dB) Resolution 1μHz Accuracy ±0.5ppm 25℃ First year aging rate: 1ppm Temperature coefficient: ±0.5ppm/℃ Temperature Coeifficient <2ppm/℃ Interfaces USB Host, USB Device, 10MHz clock source input/output General Characteristics Power 100V~240V ACrms, 50Hz/60Hz Display 4.3-inch TFT LCD, WVGA (480 x 272) Product color White and grey Product net weight 3.2kg Product size 265mm x 110mm x 320mm Standard accessories BNC-BNC cable, BNC cable with alligator clips, power cord, USB interface cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 380mm x 330mm x 320mm Standard carton gross weight 8.5kg SKU: n/a -
Laser Distance Meters
LM 50 Laser Distance Meter
Specifications LM50 Display type EBTN Display size 2.0-inches Range 50m Min. display unit 0.001m Measurement units m/ft/in Measurement basis front/rear Accuracy ±(2mm+5 x 10-5D) Laser class 2 Laser type 630~670nm, ﹤1mW Features Single measurement √ Continuous measurement √ Max/Min/Area √ Volume √ Pythagoras √ Add/Subtract √ Data storage 20 groups Auto power off 3 minutes without operation Auto laser off 30s without operation Auto backlight off 10s without operation Audio indication √ Battery status display √ Storage temperature -20℃~70℃ Operating temperature 0℃~40℃ SKU: n/a -
Rework & Soldering Station
YH 938BD+ DUAL SMD STATION
MODEL 938BD+ Power consumption 135W Temperature Range 100°C~480°C/212°F~896°F Display type LCD Temperature stability ±2°C/3.6°F (static) Heater voltage AC 24V ±10% 50Hz Sleep Function 0-99 Minutes Temperature Compensation Programmable -50 °C to +50 °C Working Environment 0~40°C/32°F~104°F Storage Environment -20°C ~ 80°C/-4°F ~ 176°F Soldering Iron & Hot Tweezers Cord Material 100% Silicone (Virtually No Memory) SKU: n/a -
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a
There are no reviews yet.