UT125C is a pocket size, ergonomic and reliable multimeter with 4000 display counts. It is a useful tool for electronics DIYers working with low currents (< 0.4A). This product is CE/cETLus certified and complies with CAT III 600V.
UT125C Pocket Size Digital Multimeter
20 in stock
1. Small size, easy to carry and operate
₨5,160 ₨5,214
20 in stock
CompareWeight | 0.2 kg |
---|---|
Dimensions | 11 × 6 × 3 cm |
Specifications | Range | UT125C |
DC voltage (V) | 600V | ±(0.5%+5) |
AC voltage (V) | 600V | ±(1.2%+5) |
DC current (A) | 400mA | ±(1.8%+5) |
AC current (A) | 400mA | ±(2%+8) |
Resistance (Ω) | 40MΩ | ±(1%+5) |
Capacitance (F) | 100μF | ±(4%+10) |
Frequency (Hz) | 10Hz~60kHz | ±(0.1%+5) |
Duty cycle | 20%~80% | Reference |
Features | ||
NCV | √ | |
Diode test/Continuity test | √ | |
Low battery indication | √ | |
Data hold/Auto power off | √ | |
Operating temperature | 0℃~50℃ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 38mm x 23mm | |
Product color | Red and grey | |
Product net weight | 180g | |
Product size | 112mm x 58mm x 35mm | |
Standard accessories | Batteries | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 60pcs | |
Standard carton measurement | 500mm x 290mm x 280mm | |
Standard carton gross weight | 13.1kg |
Based on 0 reviews
Be the first to review “UT125C Pocket Size Digital Multimeter”
-
Process Celibrators
UT715 Multifunction Loop Process Calibrator
Features of UT715 Multifunction Loop Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communication● Provides 24V loop power to transmitter while conducting mA current measurement at the same timeSKU: n/a -
Insulation Tester
Insulation Resistance Testers UT512
UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.
SKU: n/a -
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
There are no reviews yet.