1. Over voltage/current audible alarm
UT 133A Digital Multimeter
20 in stock
Specifications | Range | UT133A |
DC voltage (V) | 600mV/6000mV/60V/600V | ±(0.5%+3) |
AC voltage (V) | 600V | ±(0.7%+3) |
DC current (A) | 600uA/60mA/600mA/10A | ±(1%+3) |
AC current (A) | 10A | ±(1.2%+3) |
Resistance (Ω) | 600Ω/6000Ω/60kΩ/600kΩ/60MΩ | ±(0.8%+2) |
Capacitance (F) | 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF | ±(4%+5) |
Frequency (Hz) | 10.00Hz~1.000MHz | ±(0.1%+5) |
Temperature (℃) | ‒40℃~1000℃ | ±(1%+4) |
Temperature (℉) | ‒40℉~1832℉ | ±(1.5%+5) |
Features | ||
Display count | 6000 | |
Range selection | Auto | |
Diode | √ | |
Continuity buzzer | √ | |
NCV | √ | |
LCD backlight | √ | |
Test probe holder | √ | |
Data hold | √ | |
Low battery indication | √ | |
Overload indication | √ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 56.8mm x 36.1mm | |
Product color | Red and grey | |
Product net weight | 255g (with batteries) | |
Product size | 155mm x 76.5mm x 49mm | |
Standard accessories | Manual, test leads, K-type thermocouple | |
₨5,760 ₨6,100
20 in stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 15 × 8 × 5 cm |
Based on 0 reviews
Be the first to review “UT 133A Digital Multimeter”
-
-
Arbitary Waveform Generator
UTG2122B Function/Arbitrary Waveform Generator
Specifications UTG2122B Max frequency 120MHz Channels 2 Sampling rate 320MS/s Waveforms Sine, square, ramp, pulse, noise, DC, arbitrary; UTG2000B only: harmonic Working modes Output on/off, continuous, modulation, sweep, burst Modulations AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM Arbitrary Waveform Length 8pts~16Mpts Vertical resolution 16 bits (symbol included) Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~25MHz Pulse 1μHz~20MHz Ramp 1μHz~3MHz Harmonic 1μHz~30MHz Arbitrary 1μHz~15MHz Noise 60MHz (-3dB) Resolution 1μHz Accuracy ±0.5ppm 25℃ First year aging rate: 1ppm Temperature coefficient: ±0.5ppm/℃ Temperature Coeifficient <2ppm/℃ Interfaces USB Host, USB Device, 10MHz clock source input/output General Characteristics Power 100V~240V ACrms, 50Hz/60Hz Display 4.3-inch TFT LCD, WVGA (480 x 272) Product color White and grey Product net weight 3.2kg Product size 265mm x 110mm x 320mm Standard accessories BNC-BNC cable, BNC cable with alligator clips, power cord, USB interface cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 380mm x 330mm x 320mm Standard carton gross weight 8.5kg SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Multimeters
UT61D+ Digital Multimeter
Specifications Range UT61D+ Safety ratings CAT III 1000V/CAT IV 600V AC voltage (V) 1000V ±(1%+3) DC voltage (V) 1000V ±(0.5%+3) AC current (A) 20A ±(1.2%+5) DC current (A) 20A ±(1%+2) Resistance (Ω) 60MΩ ±(1%+2) Capacitance (F) 60mF ±(3%+5) Frequency (Hz) 10MHz ±(0.1%+4) Duty cycle (%) 0.1%~99.9% ±(2%+5) Temperature (℃/℉) -40℃~1000℃ ±(1%+3) -40℉~1832℉ ±(1%+6) Display count 6000 Bandwidth (Hz) 40Hz~1kHz LoZ ACV √ Peak Hold √ Analog bar 31 General Characteristics Power 1.5V battery (R03) x 4 Product net weight 350g Product size 190mm x 90mm x 50mm Standard accessories Battery, gold plated test leads, USB cable, temperature probe, English manual Standard individual packing Gift box, cloth bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 365mm Standard carton gross weight 15.2kg Optional accessories Bluetooth/APP SKU: n/a -
Wire & Cable Testers
UTP 03 60MHZ PROBE
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
SKU: n/a
There are no reviews yet.