UT136B+ Digital Multimeter
20 in stock
1. Measures up to 1000V and 10A AC/DC voltage and current
₨5,700 ₨5,900
20 in stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 17 × 8 × 5 cm |
Specifications | Range | UT136B+ |
DC voltage (V) | 1000V | ±(0.7%+3) |
AC voltage (V) | 1000V | ±(1%+3) |
DC current (A) | 10A | ±(1%+3) |
AC current (A) | 10A | ±(1.2%+5) |
Resistance (Ω) | 40MΩ | ±(0.8%+2) |
Capacitance (F) | 40mF | ±(3%+5) |
Frequency (Hz) | 400Hz~40mHz | ±(0.1%+4) |
Features | ||
Display count | 4000 | |
hFE | Transistor measurement | √ |
NCV | Non-contact voltage detection | √ |
Diode/transistor | √ | |
Continuity buzzer | √ | |
Data hold/Auto power off | √ | |
Low battery/Indication | √ | |
LCD backlight | √ | |
Safety rating | CAT Ⅱ 1000V, CAT Ⅲ 600V | √ |
Drop test | 2m | √ |
General Characteristics | ||
Power | 1.5V battery (R6) x 2 | |
Display | 56.5mm x 36mm | |
Product color | Red and grey | |
Product net weight | 330g | |
Product size | 175mm x 83mm x 53mm | |
Standard accessories | Batteries, test leads | |
. | ||
Based on 0 reviews
Be the first to review “UT136B+ Digital Multimeter”
-
Multimeters
UNI T Bench Top Digital Multimeter UT8803E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Digital Multi Meter
UNI-T UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test – UTL821
Digital Multi MeterUNI-T UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test – UTL821
Power supply test, adapter/charger test, battery test, lithium battery protection board test, ATE, component test, etc., commonly used in home appliance manufacturers, LCD and other computer component manufacturers, switching power supply and LED manufacturers, adapter charger manufacturers and other companies Production and testing use
SKU: n/a -
Digital Multi Meter
UT60BT
Features of UT60 Series Digital Multimeters
Certificates: CE, UKCA, cETLus
● 9999 counts
● True RMS
● Bluetooth
● Duty cycle
● Diode/Continuity test
● Temperature● Non-contact voltage
● Analog bar/Data hold
● Backlight/Relative mode
● Auto/Manual range
● Low battery indication
● Three-color LED light indicatorVideo for UT60EU:
Video for UT60S:
SKU: n/a
There are no reviews yet.