-
×
UT 305R Infrared Thermometer
- Vendor:
Subtotal: ₨10,654
-8%
Wire & Cable Testers
UT18D Voltage and Continuity Tester
Availability:
10 in stock
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test
3. Continuity test with buzzer and LED indication
4. Low battery indication and over voltage prompt
5. Flashlight
6. Test live voltage without batteries
7. Buzzer and silent modes available
8. Auto range
9. Polarity indication
₨12,000 ₨13,000
10 in stock
CompareUT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments. This series should NOT be used with 110V electrical systems.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 27 × 8 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT18D Voltage and Continuity Tester”
-
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Optical Multimeter
UT 695D-10 Optical Multimeter
Specifications Model Description Optical power meter Wavelength range 800nm~1700nm Calibrated wavelength 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm Measurement range -70~3dBm Uncertainty ±5% Display resolution Linear: 0.1%, logarithmic: 0.01dBm Connector FC/SC/ST Detector type InGaAs Visual fault locator Wavelength 650nm±10nm Power 10mW (measurable optical fiber length: approximately 8~10km) Mode Continuous/Pulse Connector FC/SC/ST Flashlight √ LAN cable sequence test Line sequence measurement (LED1~8, LED_G) General Characteristics Power 1050mAh rechargeable battery Display 42mm x 33mm Product color Red and grey Product net weight 168g Product size 132mm x 68mm x 31mm Standard accessories USB cable Standard individual packing Gift box, English manual Standard quantity per carton 10pcs Standard carton measurement 305mm x 270mm x 130mm Standard carton gross weight About 2.7kg SKU: n/a -
Soldering Irons, Tools and Hardware
YH 928D-II Soldering Iron
1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.
2. Application of high precision switching power supply technology, small size, light weight, easy to carry.
3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.
4. Application of unique design of high-precision LED display, showing clear and beautiful.
5. Equipped with LED lights, in the case of lacking light, open the lights, so that soldering is more desirable and human.
SKU: n/a -
Multimeters
YX 960 Analog Multimeter
- Excellent DC resolution factor of 2mV
- Expended resistance measurement of 20 to200M
- Series capacitor DC to enable measurement of only AC components
- A large and bright meter with a scale length of 80mm
- The sensitivity of 44pA at full scale
- Fuse and Diode protection
- Measure HFE of transistor directly
SKU: n/a -
Rework & Soldering Station
YH 899D REWORK STATION
Power consumption 700W Gun temperature 100-480oC Gun type Brushless fan Air flow 120L/MIN Gun heater material Ferro-alloys Gun heater resistance 74Ω Soldering iron temperature range 200-480oC Soldering iron type Blue type Soldering iron cable Silicagel line Soldering iron heater material high-quality heater Soldering iron heater resistance 15Ω Inner box dimension(cm) 29*20*18 Outer box dimension(cm) 59.5*41*36 Outer carton box Q’TY 8PCS/CTN Prodcut weight 2.75KG/PC SKU: n/a
Related products
-
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
Wire & Cable Testers
UTP 03 60MHZ PROBE
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
SKU: n/a -
Wire & Cable Testers
UT682 – Wire Tracker
UT682 – Wire Tracker consists of a transmitter and a receiver. It has functions like telephone wire tracking, network wire tracking, cable wire tracking, network wire check, etc. and it produces fast and accurate measurements. UT682 is an ideal tool for personnel to install and maintain network systems with communication lines and integrated wiring circuits.
SKU: n/a -
Wire & Cable Testers
MS6812 Cable Tracker
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
● Sound and Light Instruction
● Cont and Tone LED LightApplications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a
There are no reviews yet.