1.Industrial electricity
UT202A+ Digital Clamp Meter
Specifications | Range | UT202A+ |
AC current (A) | 600A | ±(2%+10) |
AC current frequency (Hz) | 50Hz~100Hz | ±(1%+5) |
AC voltage (V) | 600V | ±(0.8%+5) |
AC voltage frequency(Hz) | 10Hz~10kHz | ±(1%+5) |
DC voltage (A) | 600V | ±(0.5%+2) |
Resistance (Ω) | 60MΩ | ±(0.8%+2) |
Capacitance (F) | 60mF | ±(4%+5) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+4) |
Features | ||
Display count | 6000 | |
Auto range | √ | |
Jaw opening | 28mm | |
True RMS | √ | |
NCV | √ | |
Live wire test | √ | |
Continuity test | √ | |
Diode | √ | |
MAX/MIN | √ | |
Relative mode | √ | |
Data hold | √ | |
Low battery indication | √ | |
Auto power off | √ | |
General Characterisitics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 37mm x 25mm | |
Product color | Red and grey | |
Product net weight | 248g | |
Product size | 215mm x 63mm x 36mm | |
Standard individual packing | Gift box, Carring bag, English manual | |
Standard quantity per carton | 40pcs | |
Standard carton measurement | 485mm x 295mm x 385mm | |
Standard carton gross weight | 17.3kg |
₨5,400 ₨5,886
Weight | 0.3 kg |
---|---|
Dimensions | 21 × 6 × 4 cm |
Based on 0 reviews
Be the first to review “UT202A+ Digital Clamp Meter”
-
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a -
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a
There are no reviews yet.