-
×
TITAN 1502 DS Power Supply
- Vendor:
superworld
Subtotal: ₨6,000
-5%
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
Availability:
9 in stock
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
₨38,400 ₨40,240
9 in stock
Compare- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 24 × 8 × 5 cm |
SPECIFICATION
Safety Rating: CAT IV 600V
Display Count: 6000
DC Voltage (V): 600.0V
AC Voltage: 600.0V
LoZ ACV: 600.0V
DC Current (A): 600.0A
AC Current (A): 600.0A
Resistance (Ω): 60.00MΩ
Capacitance (F): 60.00mF
DC Current: 2000uA
AC Current: 2000uA
Frequency (Hz): 40.00MHz
Diode Test/Continuity Buzzer
Duty Cycle
Temperature (°C/°F)
Motor Test: three phase rotation test can identify the phases of the power supply
LPF (1kHz 3dB decay)
Inrush Current
AC+DC Voltage (V)
Dual-Display (Voltage+Current)
Backlight
Integrated Protection Level: IP54
Application: HVAC/R Motor
Power supply: AAA 1.5V alkaline battery × 3
Product Dimensions : (L x W x H)
8cm x 4.5cm x 23cm
Product Weight: 0.31 kg
Brand
UNI T
Based on 0 reviews
Be the first to review “UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test”
-
Multimeters
UT61B Modern Digital Multimeters
UT61 Series Digital Multimeters are products designed for multi-functional, high precision, high performance and automatic measurements.
- 1、Large LCD screen；
- 2、High resolution analog pointer display；
- 3、Full range overload protection；
- 4、Data hold, REL, Peak value measurement；
- 5、Low battery indication, backlight, and sleep mode；
- 6、External interface supports RS-232C and USB cable.UT61Series can measure AC/DC voltage and current, resistance, diode, circuit continuity, capacitance, frequency, temperature, hFE, electromagnetic induction, etc.
UT61 Series complies with the standard IEC61010: CAT. III 1000V, CAT.IV 600V; they are widely used in Industrial Production and Service, Technological Research and Design, College Education (Laboratory, Courses), and Automotive Industry.
SKU: n/a -
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
Usb Tester
UT658 A USB Testers
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: n/a -
Tool Kits
JM-8127 53 In 1 Professional Screwdriver Set Tool Kit
Features:
Common used for precision work in electronics, DIY models, jewelry, eye glasses and other home appliances.
Special pentalobe screws for opening iPhone, iPad and MacBook.
Non-slip: handle with PP & TPR material.
Accessories:
1PC 115mm Tweezer
1PC H4*120mm Extension Bar
1PC Multifunction extension bar
SKU: n/a
Related products
-
Clamp Meters
UT213C ACA DCA Digital Clamp Meters
Main Features
1. 10A/400A AC/DC measurement with Hall-effect sensor
2. Auto range makes measurement faster and more effective
3. 4000 display count, 3/s sampling rate
4. True RMS measurement
5. NCV, Non-Contact AC Voltage testing
6. Frequency and duty ratio measurement
7. MAX/MIN mode
8. Relative mode
9. Flashlight function for measuring at night or in the dark
10. K-type point contact temperature probe for temperature measurement
11. Large jaw of 30mm
12. Data hold
13. LCD backlight
14. Auto power off
15. 1m drop proof
16. Complies with CE (European Union) directives
SKU: n/a -
Clamp Meters
UT-CS09A Flex Clamp Sensor
Specifications Range UT-CS09A AC current (A) 30A/300A/3000A ±(3%+5) Frequency response (Hz) 45Hz~500Hz √ Features Flex clamp size UT-CS09A: 25.4cm (10 inches); UT-CS09C: 45.7cm (18 inches) Operating temperature 0℃~50℃ Storage temperature -20°C~60°C Storage humidity ≤80%RH Low battery indication About 3.3V Range selection Manual General Characterisitics Power 1.5V battery (R03) x 3 Product color Red and grey Product net weight 260g Product size 267mm x 119.4mm x 34mm Standard accessories Batteries, BNC adapter Standard individual packing Blister, English manual Standard quantity per carton 10pcs Standard carton measurement 495mm x 405mm x 225mm Standard carton gross weight 7kg SKU: n/a -
Clamp Meters
UT220 2000A ACA Digital Clamp Meters
UT220 series is a stable, safe and reliable3 1/2 AC and DC Digital Clamp Meters, full range overload protection and unique appearance design, which becomes more superior performance of electrical instruments. It is suitable for smelt, manufacturing, petroleum, electricpower, chemical industry etc. It’s an ideal tool for the maintenance and repair of the circuit, power equipment.
SKU: n/a -
Clamp Meters
UT221 2000A ACA DCA Digital Clamp Meters
UT221 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a
There are no reviews yet.