-
×
SOLDERING IRON WJ 60WATT
- Vendor:
superworld
Subtotal: ₨470
-9%
Clamp Meters
UT219E ACA Professional Clamp Meters
Availability:
10 in stock
Features
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
₨25,800 ₨28,340
10 in stock
CompareFeatures
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
| Weight | 0.3 kg |
|---|---|
| Dimensions | 24 × 8 × 5 cm |
| Model | UT219E | |
| AC current (A) | 60.00A ~ 600.0A | ±(1.8%+6) |
| AC voltage (V) | 6.000V ~ 600.0V | ±(1.0%+6) |
| LoZ ACV | 600.0V | ±(2.5%+6) |
| DC voltage (V) | 600.0mV ~ 600.0V | ±(0.6%+3) |
| Resistance (Ω) | 600.0Ω ~ 60.00MΩ | ±(1.0%+3) |
| Capacitance | 60.00nF ~ 60.00mF | ±(4.0%+7) |
| Frequency | 60.00Hz ~10.00MHz | ±(0.1%+6) |
| Duty ratio | 0.1% ~ 99.9% | ±(2.6%+7) |
| Features | ||
| Display count | 6000 | |
| Auto/Manual range | √ | |
| Jaw size | 33mm | |
| True RMS | √ | |
| AC current frequency response | 40Hz~400Hz | |
| AC voltage frequency response | 40Hz~400Hz | |
| Diode test | 6V/10V | √ |
| Measuring digit conversion rate | times/s | 3 |
| Measuring analogue bar conversion rate | times/s | 10 |
| Analogue bar | 31 section | √ |
| LCD display (HTN) | interface | Single display |
| Auto power off | √ | |
| Low battery indication | √ | |
| Data hold (H) | √ | |
| Relative value (REL) | √ | |
| MAX/MIN | √ | |
| Functional selection (SELECT) | √ | |
| Auto backlight | √ | |
| 2m drop proof | √ | |
| Protection grade | IP54 | |
| Input impedance | ≥10MΩ | √ |
| General Characteristics | ||
| Power supply | AAA 1.5V alkaline battery × 3 | |
| LCD size | 35mm × 31mm | |
| Device color | Red and grey | |
| Device weight | 338g | |
| Device size | 235mm × 83mm × 47mm | |
| Standard accessories | Testing probes, batteries, carrying bag | |
| Standard individual packing | Gift box, user manual | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT219E ACA Professional Clamp Meters”
-
Oscilloscopes
UTD2102CEX Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. The new interface style;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 32 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
SKU: n/a -
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a
Related products
-
Clamp Meters
UT281A True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Data hold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT281C True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Datahold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
There are no reviews yet.