UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
Earth Ground Resistance Testers
UT275 Clamp Earth Ground Testers
Availability:
Out of stock
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
₨94,800 ₨96,000
Out of stock
CompareWeight | 1.3 kg |
---|---|
Dimensions | 29 × 9 × 7 cm |
Specifications | Range | Best Accuracy |
Model | UT275 | |
Earth Ground Resistance (Ω) | 0.01~0.099Ω | ±(1%+0.01) |
0.1~0.99Ω | ±(1%+0.01) | |
1.0~49.9Ω | ±(1.5%+0.1) | |
50.0~99.5Ω | ±(2%+0.5) | |
100~199Ω | ±(3%+1) | |
200~395Ω | ±(10%+5) | |
400~590Ω | ±(20%+10) | |
600~1000Ω | ±(25%+20) | |
Leakage Current(A) | 0.00~299mA | ±(2.5%+2mA) |
0.30~2.99A | ±(2.5%+100mA) | |
3.00~30.0A | ±(2.5%+300mA) | |
Features | ||
Display Count | 9999 | |
Auto Range | √ | |
Jaw Capacity | 28mm | |
Auto Power Off | √ | |
Low Battery Indication | ≤5.2V | √ |
Data Hold | √ | |
Data Logging | 30 | |
Data Recall | √ | |
LCD Backlight | √ | |
Auto Calibration | √ | |
Resistance Limit Alarm | √ | |
General Characteristic | ||
Power | 1.5V Alkaline Batteries(LR6)×4 | |
LCD Size | 47mm X 28.5 mm | |
Product Color | Red and Grey | |
Product Net Weight | 1320g | |
Product Size | 293mm X 90mm X66 mm | |
Standard Accessories | Batteries, Test Ring, Tool Box | |
Standard Individual Packing | Gift Box, English Manual | |
Standard Quantity Per Carton | 5 PCs | |
Standard Carton Measurement | 495mm X 368mm X 310mm (0.057CBM Per Standard Carton) | |
Standard Carton Gross Weight | 16Kg |
Based on 0 reviews
Be the first to review “UT275 Clamp Earth Ground Testers”
-
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Tool Kits, Tools and Hardware
[HOT]JM-8189B
- 8 type 30 pcs of H4*28mm precision repair CR-V screwdriver bits, wide range of applications. Detailed and comprehensive.
- Hanging screwdriver design in the inner box, easy to choose at a glance.
- Whole new box texture, 300°rotating housing provides you with the convenience of maintenance and disassembly.
- Approx. 220.8g light net weight, size 145*115*27mm, lightweight and portable.
SKU: n/a
There are no reviews yet.