UT312 Vibration Tester
10 in stock
1. Highly accurate and precise
₨85,000 ₨97,000
10 in stock
CompareUT312 Vibration Tester
UT310 series handheld vibration testers can measure displacement, velocity, and acceleration of rotating and reciprocating machinery. Technicians can use these to monitor equipment status and ensure normal operation.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 18 × 7 × 3 cm |
| Specifications | Range | UT312 |
| Acceleration (O-P) | 0.1～199.9m/s² | Frequency response: 10～1500Hz, Amplitude error: ≤±5% |
| Amplitude linear error: ≤2.0m/s², ≤±10%; ＞2.0m/s², ≤±5% | ||
| Velocity (RMS) | 0.1～199.9mm/s | Frequency response: 10～1500Hz, Amplitude error: ≤±5% |
| Amplitude linear error: ≤2.0m/s, ≤±10%; ＞2.0m/s, ≤±5% | ||
| Displacement (P-P) | 1～1999μm | Frequency response: 10～500Hz, Amplitude error: ≤±5% |
| Amplitude linear error: ≤20um, ≤±10%; ＞20um, ≤±5% | ||
| Features | ||
| Data hold | √(auto data hold when releasing the measure key) | |
| Low battery indication | √ | |
| Auto power off | √(auto power off 1 minute after releasing the measure key) | |
| Battery life | Continuous measuring time > 20 hours | |
| Display count | 2000 | |
| General Characterisitics | ||
| Power | 9V battery (6F22 ) | |
| Product color | Red and grey | |
| Product net weight | 230g (including battery) | |
| Product size | 185mm x 68mm x 30mm | |
| Standard accessories | Battery, tool box | |
| Standard individual packing | Gift box, English manual | |
| Standard quantity per carton | 5pcs | |
| Standard carton measurement | 375mm x 307mm x 246mm | |
| Standard carton gross weight | 5.8kg | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT312 Vibration Tester”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Earth Ground Resistance Testers
UT521 Earth Groud Testers
UT520 series earth resistance tester hasthe functions of backlight display, low battery display, data hold, datastorage, auto power off and power saving. It can not only be used for accurate three-wiremeasurement but also simple two-wire measurement.
It is applicable to measuring the earthresistance of all kinds of electrical power system, electrical equipment and anti-thunderequipment. It can also measure the earth voltage. It is applicable to testingoperating earth systems of smelting, communication, manufacture, fossil oil,national defense, electricity, chemical industry and construction.
SKU: n/a -
Process Celibrators
UT714 Multifunction Temperature Process Calibrator
Features of UT714 Multifunction Temperature Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communicationSKU: n/a -
Laser Distance Meters
LM200C Laser Distance Meters (Discontinued)
Features of LM80C/LM120C/LM200C Laser Distance Meters
● 2.4-inch color screen
● 12 measurement modes● Electronic leveling● 3 selectable measurement references● USB 3.0 supply power● 100 groups of data storage● Rotatable screen● Camera-aided measurement● 2m drop test● IP65 dust and water proofSKU: n/a
Related products
-
Environment Meters
UT315 Vibration Tester
Main Features
1. Can measure acceleration, velocity and displacement
2. Can select different vibration frequency
3. High sensitivity sensor probe makes measurement accurate
4. Auto power off
5. Data hold
6. LCD backlight
7. Max mode
8. Data storage: 1,999 groups of data
9. USB interface
10. Equipped with long and short probes for different field measurements
11. Equipped with magnet pedestal for ergonomic purpose
12. Complies with CE (European Union) directives
SKU: n/a -
There are no reviews yet.