UT681L Cable Tester
19 in stock
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
₨3,465
19 in stock
CompareMain Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
| Weight | 0.2 kg |
|---|---|
| Dimensions | 10 × 6 × 3 cm |
| Item | Function | Model | Description |
| UT681L | |||
| Test function | To test for: RJ45/RJ11 | √ | |
| Fast test mode | √ | LED1~LED8, LED_G | |
| Low test mode | √ | LED1~LED8, LED_G | |
| To test for the case of short
circuit, crossover, open circuit, etc. |
√ | ||
| Ethernet cable: shielded/ unshielded test | √ | ||
| Manual shutdown function | √ | ||
| Auto shutdown function | √ | No operation within 10 minutes, the device will shut down automatically | |
| Single key operation | √ | ||
| Power supply: 9V battery | √ | ||
| Low voltage detection | √ | About less than 7.2V | |
| Application environment | Working temperature: 0~40℃ | √ | |
| Storage temperature: -10~50℃ | √ | ||
| Working humidity: 20~80% RH | √ | ||
| Storage humidity: 10~90% RH | √ | ||
| Altitude: ≤2000 meters | √ | ||
| Safety
standard |
CE EN61326-1: 2013; EN61326-2-2: 2013 | √ |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT681L Cable Tester”
-
-
Earth Ground Resistance Testers
UT278A Clamp Earth Ground Testers
UT270 series is widely used in earth ground and circuit resistance measurements of electric power, telecommunications, meteorology, oil field, construction and industrial electrical equipment. It can measure the ground system of the circuit without disconnecting grounding wires, auxiliary electrode. UT278A can also measure leakage current and neutralline current of earth ground system
.
SKU: n/a -
Thermal Imagers
UNI-T Uti120T Pocket-Sized Infrared Camera with Real-Time Thermal Image Mini IR Thermal Imager with Large 3.5′′ LCD Touch Display
Thermal ImagersUNI-T Uti120T Pocket-Sized Infrared Camera with Real-Time Thermal Image Mini IR Thermal Imager with Large 3.5′′ LCD Touch Display
Features of UTi120T Thermal Imaging Camera - Thermal Imager has over 10,000 pixels to troubleshoot hot and cold spots
- Adjustable emissivity from 0.10 to 0.99
- Store and share images with optional microSD Card
- Measure temperature range from -20°C to 400°C
- Select color from total 6 palettes to best capture the event
- Support WIFI
- IP54 and 1m drop proof
- Four display mode: thermal, visiable, blending.PIP
- 7 colors palettes
SKU: n/a -
Clamp Meters
CLAMP METER AC DC ET 8203
Descriptions:
1.This is a 5999 counts automatic digital clamp multimeter,small and compact design for easy carrying.
2.Stable performance,high precision,high reliability,clear reading and overload protection.
3.It is a ideal tool and instrument,laboratory,factory,radio enthusiasts and The ideal tool for the family.Specifications:
Brand:WINAPEX
Model: 8203
Color:Black
Jaw:40mm
Maximum display:5999
DC Voltage: 6V/60V/600V/1000V
AC Voltage: 6V/60V/600V/750V
AC Current: 60A/600A
DC Current: 60A/600A
Resistance(ohm):600Ω/6KΩ/60Ω/600KΩ/6MΩ/40MΩ
Capacitance:60nF/600nF/6uF/60uF/600uF/6mF/30mF
Frequency:10Hz/100Hz/1kHz/10Hz/100Hz/1MHz/10MHz
Temperature:(-20-1000 )℃/(0-1832 )℉
DC voltage DCV :yes
AC voltage ACV :yes
AC current ACA :yes
DC current DCA :yes
T-RMS:yes
NCV:yes
Square wave output:yes
On-Off Test :yes
Diode measurement:yes
Buzzer:yes
Zero line / Fire line test :yes
Data hold:yes
Material: Plastic, Electronic Parts
Battery: 2 x 1.5V AAA Batteries (not included)
Product size:176x67x33mm/6.86×2.61×1.29in
Product weight:305g/10.68ozPackage information:
Package weight:350g/12.25oz
Package size:210x80x35mm/8.19×3.12×1.37in
General Box PackagePackage included:
1 x Clamp Meter
1 x Pair of test leads
1 x Thermocouple
1 x User ManualNoted:
1.Cannot measure,there is no current through the ground wire,can only be measured as a single wire or zero Iine.
2.Cannot measure two or more lines at the same time.
3.A line contains two or more than two wire core can not be measured.SKU: n/a
Related products
-
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
Wire & Cable Testers
UTP 04 100MHZ PROBE
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
SKU: n/a
There are no reviews yet.