● Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary
● Output frequency range: 1μHz-30MHz/60MHz
Specifications | |
Model | UTG962E |
Channel | 2 |
Max frequency | 60MHz |
Sampling rate | 200MS/s |
Vertical resolution | 14 bits |
Waveforms | Sine, square, pulse, ramp, noise, DC, arbitrary |
Sweep modes | Logarithmic, linear |
Frequency Characteristics | |
Sine | 1μHz~60MHz |
Square | 1μHz~20MHz |
Ramp | 1μHz~400kHz |
Pulse | 1μHz~20MHz |
Arbitrary | 1μHz~10MHz |
Resolution | 1μHz |
Accuracy | Within 90 days ± 50ppm |
Within 1 year ± 100ppm | |
18℃~28℃ | |
Output Characteristics | |
Impedance | 50Ω/High Z |
Amplitude range | 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) |
DC offset range (AC+DC) | ±5V (50Ω); ±10V (high Z) |
Amplitude resolution | 1mV |
General Characterisitics | |
Power | 100~240VAC, 50Hz/60Hz |
Display | 4.3”TFT LCD (480×272) |
Product color | White and grey |
Product net weight | 0.33kg |
Product size | 172mm x 90mm x 68mm |
Standard accessories | USB interface cable, power cord, BNC cable with alligator clips |
Standard individual packing | Carton box |
Standard quantity per carton | 4pcs |
Standard carton measurement | 435mm x 360mm x 125mm |
Standard carton gross weight | 3.8kg |
₨61,800 ₨67,800
● Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary
● Output frequency range: 1μHz-30MHz/60MHz
Weight | 0.4 kg |
---|---|
Dimensions | 17 × 9 × 7 cm |
Parameters |
|
Rated voltage | AC220V±10% 50Hz |
Power of complete machine | 15W |
Operating environment | 0~40℃ relative humidity<80% |
Storage temperature | -20~80℃ relative humidity<80% |
Dimensions of the machine body | 17*21*16.5cm |
Weight | 1.61KG |
Performance parameters | |
Output voltage | Adjustable continuously within 0~15V |
Output current | Adjustable continuously within 0~1A (current limitation adjustment when above 0.2A) |
Output power | 15W |
Source effect | ≤1mV |
Load effect | ≤0.33% |
Ripple noise | ≤3mVrms(5Hz ~ 1MHz)/≤3mArms |
Display accuracy | 0.1V/0.1A/1mA |
Protection mode | Over-current, short circuit, over-temperature protection |
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
Advantages of thermal imager detection:
1. Intuitive, efficient and convenient, making users directly “see” the temperature variation.
2. Thermal condition of different locations for comprehensive analysis, providing more information for judgment
3. Avoiding judgment errors, reducing labor costs, and discovering poor heat dissipation and hidden trouble points
4. PC software for data analysis and report output
Specifications | UT303A+ | |||||
Temperature range | -32℃~800℃ | |||||
-25.6℉~1472℉ | ||||||
Accuracy | ≥0℃: ±1.5℃ or ±1.5%; <0℃: ±(1.5℃+0.1℃/℃) | |||||
≥32℉: ±3.0℉ or ±1.5%; <32℉: ±(3.0℉+0.1℉/℉) | ||||||
Repeatability | 0.7℃ or 0.7% (1.5℉ or 0.7%) | |||||
D:S ratio | 30:1 | |||||
Response time | 250ms | |||||
Emissivity | 0.1~1.0 (adjustable, stores 5 sets of preset values) | |||||
Spectral response | 8um~14um | |||||
Laser power | < 1mW | |||||
Features | ||||||
Auto power off | √ | |||||
Low battery indication | √ | |||||
LCD display | Color EBTN | |||||
High/low LED alarm | √ | |||||
High/low audible alarm | √ | |||||
Data hold/Lock measurement | √ | |||||
℃/℉ selection | √ | |||||
MAX/MIN/AVG/DIFF mode | √ | |||||
Data storage with date and time | – | |||||
Scheduled measurement | – | |||||
Backlight | √ | |||||
Operating temperature | 0℃~50℃ (32℉~122℉) | |||||
Storage temperature | -20℃~60℃ (-4℉~140℉) | |||||
Operating humidity | <90%RH (non-condensing) | |||||
Drop test | 1m | |||||
Tripod mounting hole | √ | |||||
General Characterisitics | ||||||
Power | 9V battery | |||||
Display | 35mm x 35mm | |||||
Product color | Red and grey | |||||
Product net weight | 310g | |||||
Product size | 172mm x 113.5mm x 53mm | |||||
Standard accessories | Battery, carrying bag | |||||
Standard individual packing | Gift box, blister, English manual | |||||
Standard quantity per carton | 10pcs | |||||
Standard carton measurement | 425mm x 335mm x 365mm | |||||
Standard carton gross weight | 6.65kg |
There are no reviews yet.