This UNI-T 100MHz Oscilloscope UT P04 is a high-quality product. This UTP04 passive scope is brand new, stable performance, and not easy to break. UTP 04 Oscilloscope lead has passed the CE Attestation of the European Community. This oscilloscope cable is manufactured with high-quality electronic components. This can be perfectly adapted to the corresponding type of oscilloscope.
UTP 04 100MHZ PROBE
20 in stock
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
₨3,532 ₨4,360
20 in stock
CompareWeight | 0.2 kg |
---|
Based on 0 reviews
Be the first to review “UTP 04 100MHZ PROBE”
-
Tools and Hardware
JM X4 Magnetic Watch
Wristband design, easy and comfortable to use, doesn’t affect any movement.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Put components on the wristband anytime you want, prevent components from missing.
Strong magentic board is made of permanent magnet, strong magnetism, long service life and efficient adsorption.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Hook and loop strap design, easy and comfortable to wear.SKU: n/a -
-
Arbitary Waveform Generator
UTG932E Function/Arbitrary Waveform Generator
Specifications Model UTG932E Channel 2 Max frequency 30MHz Sampling rate 200MS/s Vertical resolution 14 bits Waveforms Sine, square, pulse, ramp, noise, DC, arbitrary Sweep modes Logarithmic, linear Frequency Characteristics Sine 1μHz~30MHz Square 1μHz~15MHz Ramp 1μHz~400kHz Pulse 1μHz~15MHz Arbitrary 1μHz~10MHz Resolution 1μHz Accuracy Within 90 days ± 50ppm Within 1 year ± 100ppm 18℃~28℃ Output Characteristics Impedance 50Ω/High Z Amplitude range 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) DC offset range (AC+DC) ±5V (50Ω); ±10V (high Z) Amplitude resolution 1mV General Characteristics Power 100~240VAC, 50Hz/60Hz Display 4.3”TFT LCD (480×272) Product color White and grey Product net weight 0.33kg Product size 172mm x 90mm x 68mm Standard accessories USB interface cable, power cord, BNC cable with alligator clips Standard individual packing Carton box Standard quantity per carton 4pcs Standard carton measurement 435mm x 360mm x 125mm Standard carton gross weight 3.8kg SKU: n/a -
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0~40℃ relative humidity<80% Storage temperature -20~80℃ relative humidity<80% Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0~15V Output current Adjustable continuously within 0~1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a
There are no reviews yet.