UTP 04 100MHZ PROBE
20 in stock
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
₨3,532 ₨4,360
20 in stock
CompareThis UNI-T 100MHz Oscilloscope UT P04 is a high-quality product. This UTP04 passive scope is brand new, stable performance, and not easy to break. UTP 04 Oscilloscope lead has passed the CE Attestation of the European Community. This oscilloscope cable is manufactured with high-quality electronic components. This can be perfectly adapted to the corresponding type of oscilloscope.
| Weight | 0.2 kg |
|---|
Brand
UNI T
Based on 0 reviews
Be the first to review “UTP 04 100MHZ PROBE”
-
Multimeters
UT61D+ Digital Multimeter
Specifications Range UT61D+ Safety ratings CAT III 1000V/CAT IV 600V AC voltage (V) 1000V ±(1%＋3) DC voltage (V) 1000V ±(0.5%＋3) AC current (A) 20A ±(1.2%＋5) DC current (A) 20A ±(1%＋2) Resistance (Ω) 60MΩ ±(1%＋2) Capacitance (F) 60mF ±(3%＋5) Frequency (Hz) 10MHz ±(0.1%＋4) Duty cycle (%) 0.1%~99.9% ±(2%＋5) Temperature (℃/℉) -40℃~1000℃ ±(1%＋3) -40℉~1832℉ ±(1%＋6) Display count 6000 Bandwidth (Hz) 40Hz~1kHz LoZ ACV √ Peak Hold √ Analog bar 31 General Characteristics Power 1.5V battery (R03) x 4 Product net weight 350g Product size 190mm x 90mm x 50mm Standard accessories Battery, gold plated test leads, USB cable, temperature probe, English manual Standard individual packing Gift box, cloth bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 365mm Standard carton gross weight 15.2kg Optional accessories Bluetooth/APP SKU: n/a -
Multimeters
YX 960 Analog Multimeter
- Excellent DC resolution factor of 2mV
- Expended resistance measurement of 20 to200M
- Series capacitor DC to enable measurement of only AC components
- A large and bright meter with a scale length of 80mm
- The sensitivity of 44pA at full scale
- Fuse and Diode protection
- Measure HFE of transistor directly
SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-IV Soldering Iron
1. Small size, light weight, easy to carry.
2. Using internal heating type heating element, heating up fast, high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron, safe and energy saving.
5. Equipped with lights, in the case of lacking of light, open the lights, so that welding is more desirable
and humane.
6. The internal using the SMT double-panel technology manufacturing, the process is neat, and the joint is
reliable
7. The handle shell with a new environmentally friendly materials, it is safe and durable.SKU: n/a -
-
Infrared Thermometer
UT 305R Infrared Thermometer
Instantaneous measurementHigh measurement accuracy ±0.3ºCMeasurement range 32ºC ~ 43ºCContactless measurementSound notification and LED color change based on temperature measurementAdditional LightAutonomous battery systemPossibility of tripod mountingSKU: n/a
Related products
-
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Wire & Cable Testers
UTP 03 60MHZ PROBE
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
SKU: n/a
There are no reviews yet.