UTP1306 is a switch-type DC regulated power supply with single channel, which has OCP/OVP protection function, 3 groups of storage/recall preset values and output switch.
DC Power Supplies
UTP1306 DC Power Supply
Specifications | ||
Model | UTP1306 | |
Output voltage | 0~32V | |
Output current | 0~6A | |
Output power | 192W | |
Load regulation | CV<0.1%+5mVCC<0.2%+3mA | |
Accuracy(25℃±5℃) | Voltage | <0.1%+5mV |
Current | <0.2%+3mA | |
Ripple and noise | ≤1mVrms | |
Output regulation resolution Reliability | CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs | |
Display mode | LED voltage and current dual display | |
Feature | Auto conversion of constant voltage and current with current limit protection | |
General Characteristics | ||
Power | Input voltage: 110V AC/220V AC; 50Hz~60Hz | |
Product color | White and grey | |
Product net weight | 2.5kg | |
Product size | 80mm x 150mm x 230mm | |
Standard accessories | Power cord, output cables |
₨26,400 ₨28,980
Weight | 2.5 kg |
---|---|
Dimensions | 8 × 15 × 23 cm |
Based on 0 reviews
Be the first to review “UTP1306 DC Power Supply”
-
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0~40℃ relative humidity<80% Storage temperature -20~80℃ relative humidity<80% Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0~15V Output current Adjustable continuously within 0~1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Arbitary Waveform Generator
UTG962E Function/Arbitrary Waveform Generator
Specifications Model UTG962E Channel 2 Max frequency 60MHz Sampling rate 200MS/s Vertical resolution 14 bits Waveforms Sine, square, pulse, ramp, noise, DC, arbitrary Sweep modes Logarithmic, linear Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~20MHz Ramp 1μHz~400kHz Pulse 1μHz~20MHz Arbitrary 1μHz~10MHz Resolution 1μHz Accuracy Within 90 days ± 50ppm Within 1 year ± 100ppm 18℃~28℃ Output Characteristics Impedance 50Ω/High Z Amplitude range 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) DC offset range (AC+DC) ±5V (50Ω); ±10V (high Z) Amplitude resolution 1mV General Characterisitics Power 100~240VAC, 50Hz/60Hz Display 4.3”TFT LCD (480×272) Product color White and grey Product net weight 0.33kg Product size 172mm x 90mm x 68mm Standard accessories USB interface cable, power cord, BNC cable with alligator clips Standard individual packing Carton box Standard quantity per carton 4pcs Standard carton measurement 435mm x 360mm x 125mm Standard carton gross weight 3.8kg SKU: n/a -
Clamp Meters
T 26A Digital Clamp Meter
- Multifunctional, can measure AC/DC voltage, AC current, resistance,capacitance,diode,temperature.
- Stable performance, high precision, respond quickly.
- Large LCD screen, easy to read.
- Low battery indication, overload protection.
- Data hold, buzzer indication.
- Max display size of 2000
SKU: n/a -
Meter Leads
UT L25 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
SKU: n/a
There are no reviews yet.