-8%

UT18D Voltage and Continuity Tester

Availability:

10 in stock
Add to Wishlist
Compare

1. Auto power off, the conductor to be measured is greater than 12V

2. Phase rotation test
3. Continuity test with buzzer and LED indication
4. Low battery indication and over voltage prompt
5. Flashlight
6. Test live voltage without batteries
7. Buzzer and silent modes available
8. Auto range
9. Polarity indication

₨12,000 ₨13,000

10 in stock

Compare
UT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments. This series should NOT be used with 110V electrical systems.
Category:
Weight 0.3 kg
Dimensions 27 × 8 × 3 cm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT18D Voltage and Continuity Tester”

There are no reviews yet.

  • YH 939D+ SOLDERING STATION

    YH 939D+ SOLDERING STATION

    0 out of 5
    (0)
    PARAMETROS
    MODEL 939D+
    RATED VOLTAGE AC 220V±10%  50Hz
    OUTPUT POWER 75W
    Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％
    Withstand voltage and insulation tests AC1500V 0.4A 60S
    Operating Environment 0～40℃  relative humidity＜80％
    Storage environment －20～80℃  relative humidity＜80％
    Body size 14.5*12*8CM
    Weight 2.17KG
    Work voltage AC 26V±10%  50Hz
    Temperature range 200℃～480℃
    Temperature Stability ±1℃（Static）
    Display Mode LED Digital Display
    Calibration Mode PID Digitally Programmed Calibration
    PID Temperature Calibration Cycle 100MS
    Heating Core Imported High-Powered Heating Core
    Tip-to-Ground Impedance ＜2Ω
    Tip-to-Ground Voltage ＜2mV
    SKU: n/a
    ₨8,764 ₨10,900
    Read more
    Add to Wishlist
    Compare

  • UTP1310 Switching DC Power Supply

    UTP1310 Switching DC Power Supply

    0 out of 5
    (0)
    Specifications
    Model UTP1310
    Output voltage 0~32V
    Output current 0~10A
    Output power 320W
    Load regulation CV＜0.1%+5mV
    CC＜0.2%+3mA
    Power regulation CV＜0.01%+5mV
    CC＜0.2%+3mA
    Output regulate resolution CV: 10mV (typical), CC: 1mA (typical)
    MTBF(e): ≥2000hrs
    Programming accuracy
    (25℃±5℃)    		 Voltage ＜0.1%+1digit
    Current ＜0.2%+3mA
    Ripple and noise
    (20Hz~20MHz)    		 Voltage ≤10mVrms
    Current ≤5mArms
    Display mode LED voltage and current dual display
    General Characteristics
    Power Input voltage: 110V AC/220V AC, 50Hz~60Hz
    Display EBTN LCD
    Product color White and grey
    Product size (W×H×D) 80mm x 150mm x 230mm
    Product net weight 2.5kg
    SKU: n/a
    ₨33,000 ₨33,340
    Add to cart
    Add to Wishlist
    Compare

  • YH 706 REWORK STATION

    YH 706 REWORK STATION

    0 out of 5
    (0)
    Model 706 872D+
    Power Consumption 720W 720W
    Measurement 124*187*157MM 124*187*157MM
    Weight 4.5KG 4.8KG
    Working environment 0~50°C 0~50°C/0~122°F
    Storage environment -20-80°C -20-80°C
    Hot Air Reworks
    Airflow type dual-turbo blower diaphragm pump spiral wind
    Air Flow ≤168L/min ≤24L/min
    Temperature Range 100°C-480°C 100°C-480°C
    Temperature Stability ±1°C ±1°C
    Display Type Digital Display Digital Display
    Handle length ≥90CM ≥90CM
    Soldering Iron
    Temperature Range 200°C-480°C 200°C-480°C
    Temperature Stability ±2°C ±2°C
    Tip of ground voltage <2mv<> <2mv<>
    Tip ground impedance <2 ohm <2 ohm
    Display Type Digital Display Digital Display
    Handle length ≥100CM ≥100CM
    SKU: n/a
    ₨13,080 ₨16,658
    Read more
    Add to Wishlist
    Compare

  • YIHUA 947-II SOLDERING IRON

    YIHUA 947-II SOLDERING IRON

    0 out of 5
    (0)

    Model:947-II

    Power supply voltage:110V 60HZ/220V 50HZ

    Power:≤60W

    Temperature range:220-480℃

    Temperature stability :±1℃（static state)

    SKU: n/a
    ₨1,378 ₨1,630
    Add to cart
    Add to Wishlist
    Compare

  • UT 205E 1000A True RMS Digital Clamp Meter

    UT 205E 1000A True RMS Digital Clamp Meter

    0 out of 5
    (0)
    Specifications Range UT205E
    AC current (A) 1000A ±(2%+5)
    AC current frequency response 50Hz~60Hz
    AC voltage (V) 6V ±(1.2%+3)
    60V/600V/1000V ±(1%+8)
    DC voltage (V) 600mV ±(0.8%+3)
    6V/60V ±(0.5%+5)
    600V ±(0.5%+5)
    1000V ±(0.5%+5)
    AC voltage frequency response 40Hz~400Hz
    Resistance (Ω) 600Ω ±(1%+3)
    6KΩ/60KΩ/600KΩ ±(1%+2)
    6MΩ/60MΩ ±(2%+8)
    Capacitance (F) 60nF ±(4%+25)
    600nF/6μF/60μF/600μF ±(4%+5)
    6mF/60mF ±(10%+9)
    Low voltage frequency (Hz) 10Hz~1MHz ±(0.1%+3)
    Duty cycle (%) 10%~90% ±(2.6%+7)
    Features
    Display count 6000
    Jaw opening 42mm
    Current frequency 50Hz~60Hz
    High voltage frequency 40Hz~400Hz
    Auto power off √
    Continuity test √
    Auto/Manual range √
    Low battery indication √
    Diode test √
    Relative mode/Data hold √
    MAX/MIN √
    Function selection √
    Flashlight √
    Wake-up function √
    Auto power off current: ＜50μA √
    Input impedance (ACV/DCV) ≥10MΩ √
    General Characteristics
    Power 1.5V battery (R03) x 3
    Display 43mm x 45mm
    Product color Red and grey
    Product net weight 465g
    Product size 272mm x 81mm x 43.5mm
    Standard accessories Test leads, batteries, point contact temperature probe
    Standard individual packing Gift box, carrying bag, English manual
    Standard quantity per carton 10pcs
    Standard carton measurement 355mm x 330mm x 315mm
    Standard carton gross weight About 7.1kg
    SKU: n/a
    ₨12,600 ₨16,350
    Add to cart
    Add to Wishlist
    Compare

  • UTP 3305C DC POWER SUPPLY

    UTP 3305C DC POWER SUPPLY

    0 out of 5
    (0)
    Specifications
    Model UTP3305C
    Output voltage 0~30V (CH1/CH2)
    Output current 0~5A (CH1/CH2)
    Output power 315W
    Load regulation Voltage <0.01%+5mV
    Current <0.1%+10mA
    Line regulation Voltage <0.01%+3mV
    Current <0.1%+3mA
    Resolution Voltage 10mV
    Current 1mA
    Accuracy (25℃±5℃) Voltage <0.5%+20mV
    Current <0.5%+10mA
    Ripple (20Hz~20MHz) Voltage ≤2mVrms
    Current ≤3mArms
    Output temperature
    coefficient    		 Voltage ≤150ppm
    Current ≤150ppm
    Voltage rise delay ≤100ms (10% rated load)
    Parallel/Series load regulation ≤0.1%+0.1V
    CH3 output features Voltage 5V
    Current 3A
    Voltage accuracy ±50mV
    Load regulation ±50mV
    Interfaces USB Device, RS-232
    General Characteristics
    Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz
    Display 4 windows, LED
    Product net weight 9.1kg
    Product size 260mm x 176mm x 317mm
    Standard accessories USB and RS-232 interface cables, output cables
    Standard individual packing Carton box
    Standard quantity per carton 1pcs
    Standard carton measurement 440mm x 388mm x 295mm
    Standard carton gross weight 10kg
    SKU: n/a
    ₨100,000 ₨110,000
    Add to cart
    Add to Wishlist
    Compare

Related products

  • UT681C Cable Tester

    UT681C Cable Tester

    0 out of 5
    (0)

    Main Features

    1. Tests Ethernet cables and telephone lines

    2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing

    3. Ethernet cables: Shielded/Unshielded test

    4. Visible LED indication

    5. Automatically check circuit breakage, short circuit and cross circuit

    6. Can toggle between fast and slow speed test modes

    7. Single key operation

    8. Manual/auto power off (after 10-minute inactivity)

    9. Low battery indication

    10. Power supplied by 9V layer-built battery

    SKU: n/a
    ₨3,074 ₨3,509
    Add to cart
    Add to Wishlist
    Compare

  • UT681HDMI Cable Tester

    UT681HDMI Cable Tester

    0 out of 5
    (0)

    1. Tests HDMI/MINI-HDMI cables

    2. Fastline collocation type: A with A, A with C and C with C

    3. Checks circuit breakage, short circuit, cross circuit and the missing wire

    4. 20 visible LED indicators

    5. Can toggle between scan and full display test modes

    6. Single key operation

    7. Manual/auto power off (after 10-minute inactivity)

    8. Low battery indication

    9. CE certification

    10. Power supplied by 9V layer-built battery

    SKU: n/a
    ₨5,100 ₨5,539
    Add to cart
    Add to Wishlist
    Compare

  • UTP 03 60MHZ PROBE

    UTP 03 60MHZ PROBE

    0 out of 5
    (0)

    Attenuation ratio: 1× and 10× optional.

    Portable design according to ergonomics.

    Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.

    Safety standards: it has passed the CE Attestation of the European Community.

    Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.

    Measurement in intermediate and low-frequency signals.

    Accessories included by PP series passive voltage rapier.

    Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.

    Contractive-type acuminate hook.

    12cm earth wire with an alligator clip.

    Locating sleeve adapts to IC testing.

    Double-nip wire.

    SKU: n/a
    ₨3,401 ₨4,033
    Add to cart
    Add to Wishlist
    Compare

  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
    ₨0
    Read more
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447