-8%

UT18D Voltage and Continuity Tester

Availability:

10 in stock
Add to Wishlist
Compare

1. Auto power off, the conductor to be measured is greater than 12V

2. Phase rotation test
3. Continuity test with buzzer and LED indication
4. Low battery indication and over voltage prompt
5. Flashlight
6. Test live voltage without batteries
7. Buzzer and silent modes available
8. Auto range
9. Polarity indication

₨12,000 ₨13,000

10 in stock

Compare
UT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments. This series should NOT be used with 110V electrical systems.
Category:
Weight 0.3 kg
Dimensions 27 × 8 × 3 cm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT18D Voltage and Continuity Tester”

There are no reviews yet.

  • LM 571LD-I Laser Level Meter

    LM 571LD-I Laser Level Meter

    0 out of 5
    (0)
    Specifications LM571LD-I
    Display type Green
    Laser type 1V1H
    Expanded Angle H130°/V150°
    Laser class Class 2
    Light source 10mW
    Laser wavelength 510nm
    H/V accuracy ±2mm/10m
    Self-leveling range 3°±1°
    Self-leveling time 3s
    Working distance (Line) 20m; ＞30m with detector
    Operating time ＞12h (All lasers on)
    Tripod mounting hole √
    SKU: n/a
    ₨14,400 ₨15,794
    Add to cart
    Add to Wishlist
    Compare

  • YH 929D-II SOLDERING IRON

    YH 929D-II SOLDERING IRON

    0 out of 5
    (0)

    Model：929D-II

    Voltage：220V~240V/AC,50Hz

    Maximum power：130W

    Rated power：18W

    Temperature range：90~480°C/194~896°F

    SKU: n/a
    ₨7,632 ₨8,555
    Read more
    Add to Wishlist
    Compare

  • YH 853D 2A Rework Station All IN 1

    YH 853D 2A Rework Station All IN 1

    0 out of 5
    (0)
    • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
    • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
    • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
    • 4). Hot air rework, soldering iron are equipped by variety of fault protection
    SKU: n/a
    ₨20,400 ₨22,111
    Add to cart
    Add to Wishlist
    Compare

  • YH 939D+ SOLDERING STATION

    YH 939D+ SOLDERING STATION

    0 out of 5
    (0)
    PARAMETROS
    MODEL 939D+
    RATED VOLTAGE AC 220V±10%  50Hz
    OUTPUT POWER 75W
    Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％
    Withstand voltage and insulation tests AC1500V 0.4A 60S
    Operating Environment 0～40℃  relative humidity＜80％
    Storage environment －20～80℃  relative humidity＜80％
    Body size 14.5*12*8CM
    Weight 2.17KG
    Work voltage AC 26V±10%  50Hz
    Temperature range 200℃～480℃
    Temperature Stability ±1℃（Static）
    Display Mode LED Digital Display
    Calibration Mode PID Digitally Programmed Calibration
    PID Temperature Calibration Cycle 100MS
    Heating Core Imported High-Powered Heating Core
    Tip-to-Ground Impedance ＜2Ω
    Tip-to-Ground Voltage ＜2mV
    SKU: n/a
    ₨8,764 ₨10,900
    Read more
    Add to Wishlist
    Compare

  • YH 928D-III Soldering Iron

    YH 928D-III Soldering Iron

    0 out of 5
    (0)

    1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.

    2. Application of high precision switching power supply technology, small size, light weight, easy to carry.

    3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.

    4. Application of unique design of high-precision LED display, showing clear and beautiful.

    5. Red is for 110W, yellow is for 90W and blue is for 65W.

    SKU: n/a
    ₨4,306 ₨6,355
    Add to cart
    Add to Wishlist
    Compare
  • ,

    JM CT4-1 PLIER

    ,

    JM CT4-1 PLIER

    0 out of 5
    (0)
    • Plastic coated metal handle, precision blades for clean cuts on wires
    • It is suitable for cutting the RJ45 network wire and RJ11 telephone wire.
    • Comes with a wire stripper, it is perfect for you to strip the wire.
    SKU: n/a
    ₨1,500 ₨1,700
    Add to cart
    Add to Wishlist
    Compare

Related products

  • UT681L Cable Tester

    UT681L Cable Tester

    0 out of 5
    (0)

    Main Features

    1. Tests Ethernet cables and telephone lines

    2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing

    3. Ethernet cables: Shielded/Unshielded test

    4. Visible LED indication

    5. Automatically check circuit breakage, short circuit and cross circuit

    6. Can toggle between fast and slow speed test modes

    7. Single key operation

    8. Manual/auto power off (after 10-minute inactivity)

    9. Low battery indication

    10. Power supplied by 9V layer-built battery

    SKU: n/a
    ₨3,465
    Add to cart
    Add to Wishlist
    Compare

  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
    ₨0
    Read more
    Add to Wishlist
    Compare

  • LKZ-1000 Wires and pipe locator

    LKZ-1000 Wires and pipe locator

    0 out of 5
    (0)
    • Passive or active modes of tracing.
    • Detection of underground live wires.
    • Detection of underground wires with no voltage (radio mode).
    • Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
    • Tracing metallic or non-conductive pipes using an additional probe.
    • Tracing non-conductive pipelines using a “floating” probe.
    • Tracing a determined cable.
    • Determining the depth of a cable.
    SKU: n/a
    ₨922,500 ₨12,022,500
    Add to cart
    Add to Wishlist
    Compare

  • MS6812 Cable Tracker

    MS6812 Cable Tracker

    0 out of 5
    (0)

    The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker

    ● Sound and Light Instruction
    ● Cont and Tone LED Light

    Applications
    – Judge Continuity of the Cables or Wires
    – Track the Cables or Wires, and Diagnose the Break Point
    – Receive the Tone Signal on the Cables or Wires(Telephone Line)
    – Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
    – Send a Single Solid or a Dual Alternating Tone to the Target Cables or Wires

    SKU: n/a
    ₨2,631 ₨3,291
    Add to cart
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447