-14%

YH 1502D+ DC POWER SUPPLY


Parameters
Rated voltage AC220V±10%  50Hz
Operating environment 0~40℃  relative humidity<80%
Storage temperature -20~80℃  relative humidity<80%
Dimensions of the machine body 27*14*22cm
Weight 1.9KG
Performance parameters
Output voltage Adjustable continuously within 0~15V
Output current Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A)
Output power 15W
Source effect ≤1mV
Load effect ≤0.33%
Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms
Display accuracy 0.1V/0.1A/1mA
Protection mode Over-current, short circuit, over-temperature protection
Dissipation mode Air cooling

6,000 7,013

Compare

1. High accuracy and reliability

 

2. Short circuit protection and automatic recovery function

 

3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.

Category:
Weight 1.9 kg
Dimensions 27 × 14 × 22 cm

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 1502D+ DC POWER SUPPLY”

There are no reviews yet.

  • YH 898BD+ REWORK STATION

    0 out of 5
    (0)
    Machine parameter
    Rated voltage AC 220V±10%  50Hz
    Total Power 730W
    300℃ Constant Temperature Power

    (High-Speed PID Programmed to

    Energy Savings)

    250W±10%
    Operating Environment 0~40℃ Relative humidity<80%
    Storage temperature -20~80℃  Relative humidity<80%
    Dimensions 13.5*15*10cm
    weight 2.65KG
    SKU: n/a
  • UT L30 Meter Lead

    0 out of 5
    (0)

    ● Leads length: 900mm, Rod length: 136mm

    ● Tip length: 15.7mm
    ● Safety level: CAT III 1000V/CAT IV 600V 10A
    ● Safety certificate: EN 61010-031 A1:2015
    ● Features and application: Double insulated UL authenticated
    SKU: n/a
  • UT 693D Optical Multimeter (Power Meter & VFL)

    0 out of 5
    (0)
    Specifications Description UT693D
    Optical power meter Wavelength range 800nm~1700nm
    Calibrated wavelength 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm
    Measurement range UT692D/UT693D: -70~10dBm, UT692G: -50~26dBm
    Uncertainty ±5%
    Display resolution Linear: 0.1%, logarithmic: 0.01dBm
    Connector FC/SC/ST
    Detector  type InGaAs
    Visual faultlocator Wavelength 650nm±10nm
    Power 10mW (measurable optical fiber length: approximately 8~10km)
    Mode Continuous/Pulse
    Connector FC/SC/ST
    Features
    Low battery indication
    Auto power off
    IP rating IP65
    Drop test 2m
    General Characterisitics
    Power 1.5V battery (LR6) x 3
    Display 63mm x 40mm
    Product color Red and grey
    Product net weight 300g
    Product size 189mm x 87mm x 45mm
    Standard accessories Batteries, carrying bag
    Standard individual packing Gift box, English manual
    Standard quantity per carton 10pcs
    Standard carton measurement 295mm x 250mm x 210mm
    Standard carton gross weight 5.66kg
    SKU: n/a
  • JM-6092A 57 in 1 Multi-Functional Screwdriver Hand Tool Set

    0 out of 5
    (0)
    1. The tool box is manufacture from PP plastic, transparent and clear.
    2. Plastic design, strong resistance to fall, new pressure switch, strong and beautiful.
    3. The key position uses high quality CR-V material, the whole is durable: the extension pole that is equipp can solve a few narrow areas easily.
    4. The tool is equipp with strong magnetic anti-slide handle, which accords with the ergonomic appearance
    5. Double-side ball anti-slip design, with strong magnetic multi-angle lengthening bar, 9 knots are adjustable, make it easier to use .
    1. 57 Pcs in 1 Electronic bits Screwdriver Tools Kit Repair set
    2. Model: JM-6092A
    3. Package weight: 658g/1.45lb
    4. 32pcs- 6.35mm CR-V bits; v 20pcs- 4mm CR-V precision bits
    5. lpcs- 120mm PP&TPR plastic precision handle
    6. 1pcs- 125mm PP&TPR plastic non-slip handle
    7. 1pcs- 125mm Aluminum extension rod
    8. lpcs- 60mm Fine steel extension rod
    9. 1pcs- 130mm multi angle extension rod
    SKU: n/a
  • YH 938D SMD STATION

    0 out of 5
    (0)

    1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.

    2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.

    3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.

    4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
    5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.

    SKU: n/a
  • UT 207 CLAMP METER

    0 out of 5
    (0)

    1. 1000A AC/DC current measurement, 3 times/s sampling rate                                                                                       2. True RMS                                                                                                                                                                                 3. Inrush current                                                                                                                                                                         4. Zeroing function                                                                                                                                                                     5. Full icon display                                                                                                                                                                     6. MAX/MIN                                                                                                                                                                               7. Data hold; Duty cycle                                                                                                                                                             8. Auto power off and low battery indication                                                                                                                         9. Diode; Continuity buzzer; Input Impedance for DCV

    SKU: n/a