1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Parameters |
|
Rated voltage | AC220V±10% 50Hz |
Operating environment | 0~40℃ relative humidity<80% |
Storage temperature | -20~80℃ relative humidity<80% |
Dimensions of the machine body | 27*14*22cm |
Weight | 1.9KG |
Performance parameters | |
Output voltage | Adjustable continuously within 0~15V |
Output current | Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A) |
Output power | 15W |
Source effect | ≤1mV |
Load effect | ≤0.33% |
Ripple noise | ≤3mVrms(5Hz ~ 1MHz)/≤3mArms |
Display accuracy | 0.1V/0.1A/1mA |
Protection mode | Over-current, short circuit, over-temperature protection |
Dissipation mode | Air cooling |
₨6,000 ₨7,013
1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Weight | 1.9 kg |
---|---|
Dimensions | 27 × 14 × 22 cm |
Description | |
Certificates | CE, RoHS |
Transmitter | |
Port flashing | √ |
Wire tracking | √ |
Line alignment | √ |
Open-short test | 10kΩ |
Polarity test | √ |
Operating time | >8 hours |
Receiver | |
Wire tracking | RJ11>3000m; RJ45>100m |
NCV function | √ |
Headset jack | 3.5mm |
Low battery indication | √ |
Operating time | >5 hours |
GENERAL CHARACTERISTICS | |
Power | 1050mAh rechargeable lithium battery |
Product net weight | Transmitter: around 95g; Receiver: around 127g |
Product size | Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm |
Standard accessories | USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual |
Standard individual packing | Gift box, carrying bag |
Standard quantity per carton | 20pcs |
Standard carton measurement | 480mm x 370mm x 325mm |
Standard carton gross weight | About 10kg |
Specifications | ||
Model | Description | |
Optical power meter | Wavelength range | 800nm~1700nm |
Calibrated wavelength | 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm | |
Measurement range | -70~3dBm | |
Uncertainty | ±5% | |
Display resolution | Linear: 0.1%, logarithmic: 0.01dBm | |
Connector | FC/SC/ST | |
Detector type | InGaAs | |
Visual fault locator | Wavelength | 650nm±10nm |
Power | 10mW (measurable optical fiber length: approximately 8~10km) | |
Mode | Continuous/Pulse | |
Connector | FC/SC/ST | |
Flashlight | √ | |
LAN cable sequence test | Line sequence measurement (LED1~8, LED_G) | |
General Characteristics | ||
Power | 1050mAh rechargeable battery | |
Display | 42mm x 33mm | |
Product color | Red and grey | |
Product net weight | 168g | |
Product size | 132mm x 68mm x 31mm | |
Standard accessories | USB cable | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 10pcs | |
Standard carton measurement | 305mm x 270mm x 130mm | |
Standard carton gross weight | About 2.7kg |
Specifications | Range | UT-CS09A |
AC current (A) | 30A/300A/3000A | ±(3%+5) |
Frequency response (Hz) | 45Hz~500Hz | √ |
Features | ||
Flex clamp size | UT-CS09A: 25.4cm (10 inches); UT-CS09C: 45.7cm (18 inches) | |
Operating temperature | 0℃~50℃ | |
Storage temperature | -20°C~60°C | |
Storage humidity | ≤80%RH | |
Low battery indication | About 3.3V | |
Range selection | Manual | |
General Characterisitics | ||
Power | 1.5V battery (R03) x 3 | |
Product color | Red and grey | |
Product net weight | 260g | |
Product size | 267mm x 119.4mm x 34mm | |
Standard accessories | Batteries, BNC adapter | |
Standard individual packing | Blister, English manual | |
Standard quantity per carton | 10pcs | |
Standard carton measurement | 495mm x 405mm x 225mm | |
Standard carton gross weight | 7kg |
1. Small size, light weight, easy to carry.
2. Usage of internal heating element for fast heating and high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron,
for safety and energy saving.
5. Equipped with LED lights, in the case of lacking of light, open the lights, so that soldering is more
desirable and humanized.
6. Apply the SMT double-panel manufacturing technology with neat process and solid joints
7. The handle shell with a new environmentally friendly materials is safe and durable.
There are no reviews yet.