-
×
YH 898BD+ REWORK STATION
- Vendor:
Subtotal: ₨13,680
-8%
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Tool Kits
JM 8116 45 in 1 Screwdriver Set Ratchet Hand-Tools
Description
JAKEMY JM-8116 45 in 1 Screwdriver Set Ratchet Hand-tools Suite Furniture Computer Electrical maintenance Tools also called 31-in-1 interchangeable precise manual tool set, jakemy jm 6123, jakemy tools review, repair tools, Tool kit, Hand tools Set, jakemy precision screwdriver set, JM 6123, jakemy screwdriver set 31 in 1 is a professional portable hardware tools; it is Light weight & has compact design. It contains High hardness and good toughness, PP&TPR material and non-slip handle. This set of tools is designed for repairing mobile phones (not for iPhone), hard drives and other electronic products.
Brand: Jakemy
Model: JM-6123
- Strong and shockproof storage box protects your tools.
- Ratchet handle.
- 360 Degree rotary screwdriver handle.
- Name: Colorful ring hardware hand set tool
- Multi-angle extension bar fits your needs.
- With lengthened bar to increase screwdriver work range.
- Material: Cr-V Steel
- Screwdriver Type: Cross, Hex, Straight
- Size: approx. 227 X 127 X 51 mm/8.94 X 5 X 2.01 in
- Suitable for: Home appliance, furniture, machine, car repair
- Package weight: 1.8kg
Package content:
- 1 x Rotatable Ratchet Handle
- one x Precision Screwdriver Handle
- 1 x Multiangle Extension Bar
- 1 x Extension Bar
- 9 x Sockets
- 10 x Colorful Ring Bits
- 6 x Nickel Plated Bits
- 1 x Marble Connector
- one x Magnetizer
- 1 x Tool Box
SKU: n/a -
Laser Level Meter
LM 571LD-I Laser Level Meter
Specifications LM571LD-I Display type Green Laser type 1V1H Expanded Angle H130°/V150° Laser class Class 2 Light source 10mW Laser wavelength 510nm H/V accuracy ±2mm/10m Self-leveling range 3°±1° Self-leveling time 3s Working distance (Line) 20m; ＞30m with detector Operating time ＞12h (All lasers on) Tripod mounting hole √ SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Tool Kits, Tools and Hardware
JM-Y03 PLUS 43 in 1 Dual Dynamics Precision Electric Screwdriver
- Ultra-long standby time dual dynamics precision screwdriver: Portable and multifunctional easy to handle repair problems.
- Pocket size lightweight, easy to carry: The battery can be removed and replaced at any time.
- Screwdriver with pen shape design exquisite and flexible.
- Upgraded chip greatly increases efficiency.
- Meet daily maintenance demands.
SKU: n/a -
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a
Related products
-
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a
There are no reviews yet.