YH 908 HAND HELD SOLDERING STATION
Out of stock
| Model | 908 |
| Power | 60W |
| Voltage range | AC 220V~240V,50Hz / AC 100V~125V,60Hz |
| Weight | 0.2kg/pc |
| Working environment | 0~40°C/32~104°F |
| Storage environment | -20~80°C/-4~176°F |
₨3,205 ₨4,606
Out of stock
Compare1. Circuit part use the dual panel, SMD technology design, electric iron overall stability is much higher.
2. Using the latest temperature control circuit, energy efficient, while rapid heating, cutting temperature recovery performance.
3. With thermostat circuit, thermostat range: 200 °C -450 °C. Users can very easily adjust the settings as needed.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 21 × 6 × 4 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 908 HAND HELD SOLDERING STATION”
-
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Soldering Irons
YH 947-VII Soldering Iron
1.Small size, light weight, easy to carry.
2.Use the internal heating type heating core, high efficiency.
3.947VII temperature adjustable.
4.947VII with a power switch, when the appliance is not in use, you can turn off the
switch, safe and energy saving.
5.The internal use SMT double-sided board manufacturing process, the process is neat
and the solder joint is firm.
6.The handle uses completely new environmental protection material, safe and durable.
SKU: n/a -
Rework & Soldering Station
YH 950 HIGH FREQUENCY SOLDERING STATION
MODEL 950 RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 150W WORKING ENVIRONMENT 0～40℃ relative humidity＜80％ STORAGE ENVIRONMENT －20～80℃ relative humidity＜80％ BODY SIZE 20*12.6*9.8CM WEIGHT 4.6KG WORK VOLTAGE AC 26V±10% 50Hz TEMPERATURE RANGE Three-optional temperature control, respectively：①200-480℃，②100-450℃，③50-420℃ TEMPERATURE STABILITY ±1℃ （Static） DISPLAY TYPE LCD display PID TEMPERATURE CORRECTION CYCLE rapidly 20ms TIP OF GROUND VOLTAGE ＜2Ω TIP GROUND IMPEDANCE ＜2mV SKU: n/a -
Rework & Soldering Station
YH 938BD+ DUAL SMD STATION
MODEL 938BD+ Power consumption 135W Temperature Range 100°C~480°C/212°F~896°F Display type LCD Temperature stability ±2°C/3.6°F (static) Heater voltage AC 24V ±10% 50Hz Sleep Function 0-99 Minutes Temperature Compensation Programmable -50 °C to +50 °C Working Environment 0~40°C/32°F~104°F Storage Environment -20°C ~ 80°C/-4°F ~ 176°F Soldering Iron & Hot Tweezers Cord Material 100% Silicone (Virtually No Memory) SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Multimeters
YX 960 Analog Multimeter
- Excellent DC resolution factor of 2mV
- Expended resistance measurement of 20 to200M
- Series capacitor DC to enable measurement of only AC components
- A large and bright meter with a scale length of 80mm
- The sensitivity of 44pA at full scale
- Fuse and Diode protection
- Measure HFE of transistor directly
SKU: n/a
Related products
-
Soldering Irons, Tools and Hardware
YH 947-IV Soldering Iron
1. Small size, light weight, easy to carry.
2. Using internal heating type heating element, heating up fast, high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron, safe and energy saving.
5. Equipped with lights, in the case of lacking of light, open the lights, so that welding is more desirable
and humane.
6. The internal using the SMT double-panel technology manufacturing, the process is neat, and the joint is
reliable
7. The handle shell with a new environmentally friendly materials, it is safe and durable.SKU: n/a
There are no reviews yet.