YIHUA 3010D DC Power supply
This model has compact design with all metal construction.
1.This unit now features a Dual LED display with highly accurate LED digital readout.
2.Maximum output is 30V at 10A.
- High stabilized output voltage.
- Short circuit protection.
5.Over loading and current protection.
₨22,500 ₨25,008
- Model: YH-3010D
- Compact Design
- All Metal Construction
- Dual LED Display
- High Stabilized Output Voltage
- Short Circuit Protection
- Over Loading and Current Protection
| Weight | 2.5 kg |
|---|---|
| Dimensions | 15 × 15 × 10 cm |
Operating Conditions:
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Ripple Noise: ≤1 MVRMS(RMS)
Temperature Coefficient: ≤ 200PPM/°C
Stable Current
The output current is between 0 and nominal value continuously adjustable
Power Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 3010D DC Power supply”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Soldering Iron
Mechanic Special Solder Paste XG-50 35G 183°C
This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job.This pack is the right amount of solder paste for most hobby projects. This paste is the replacement for solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste.
SKU: n/a -
Multimeters
UT71C Intelligent Digital Multimeters
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
SKU: n/a -
-
Clamp Meters
Digital AC DC Clamp Multimeter T 26A
Specifications Of Portable Professional Digital LCD Clamp Multimeter T26A:
- Model: T-26A
- Max.Dispaly:2000
- Battery type: 2 x 1.5V AAA Battery(not included)
- Automatic power-off: yes
- DC voltage:
- Range: 600V
- Accuracy: ±(1%+5)
- AC voltage:
- Range:600V
- Accuracy: ±(1.5%+5)
- AC current:
- Range:200A/400A
- Accuracy: ±(2.5%+5)
- Resistance:
- Range: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
- Accuracy: ±(1.2%+5)
- Temperature:
- Range: -30~1000℃
- Accuracy:±(3%+4)/±(3%+15)
- clamp opening Diameter: 30mm
- Continuity: <50Ω buzzer sounds.
- Item size: 214 x 111 x 40mm
- Item weight:135g
Package Include:
- 1x Digital Clamp Meter T26A
Best Online Shopping Website for Handheld Professional Portable Digital clamp multimeter T26A Ac current Ammeter Voltmeter Volt ohm MultiTester in cheap price in Karachi Lahore Islamabad Rawalpindi Sukkur Peshawar Multan Quetta Faisalabad and all over Pakistan
SKU: n/a
Related products
-
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications Model UTP1310 Output voltage 0~32V Output current 0~10A Output power 320W Load regulation CV＜0.1%+5mV
CC＜0.2%+3mAPower regulation CV＜0.01%+5mV
CC＜0.2%+3mAOutput regulate resolution CV: 10mV (typical), CC: 1mA (typical) MTBF(e): ≥2000hrs Programming accuracy
(25℃±5℃)Voltage ＜0.1%+1digit Current ＜0.2%+3mA Ripple and noise
(20Hz~20MHz)Voltage ≤10mVrms Current ≤5mArms Display mode LED voltage and current dual display General Characteristics Power Input voltage: 110V AC/220V AC, 50Hz~60Hz Display EBTN LCD Product color White and grey Product size (W×H×D) 80mm x 150mm x 230mm Product net weight 2.5kg SKU: n/a -
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
There are no reviews yet.