YIHUA 605D DC Power Supply
YH-605D communication maintenance power supply
605D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within
the rated range. Double digital display shows output voltage and current independently. Several
protection functions include current limitation, voltage reduction, short circuit protection, over-
temperature protection, etc.
The design is applied to production line of the plant, maintenance, laboratories and is also
a necessary device for the communication industry.
₨22,000 ₨23,710
Principle description of constant voltage/constant current CV/CC
The operation mode of constant voltage/constant current can be automatically switched depending
on the comparison result of the load current and limited current value.
- a) Constant voltage CV
When the existing current value is smaller than the set output limit current value, the power supply
is working under the constant voltage mode. The CV indicator light on the front panel is on, the output
voltage is controlled and it will be the same as the set value. Current changes with the load.
- b) Constant current mode (CC)
When the current value exceeds the limit value of the output current, the equipment will work in the
CC mode. The CC indicator light on the front panel is on, the output current value is controlled to
the set value. Since the limited output power cannot be overloaded, the output voltage can be lower
than the set value. When the output current is lower than the set value, the equipment will
automatically change to CC mode.
| Weight | 5.9 kg |
|---|---|
| Dimensions | 25 × 13 × 15 cm |
Product parameters
| Machine parameters | |
| rated voltage | AC220V 50Hz |
| Power of complete machine | 380W |
| Operating environment | 0～40℃ relative humidity ＜80％ |
| Storage Temperature | －20～80℃ relative humidity ＜80％ |
| Dimensions | 255*130*150mm |
| weight | 6.1KG |
| Specifications | |
| output voltage | Adjustable continuously within 0～60V |
| output current | Adjustable continuously within 0～5A
(current limitation adjustment when above 0.2A) |
| output power | 300W |
| Source effect | 1mV |
| load effect | ≤0.33% |
| Ripple noise | ≤3mVrms（5Hz ~ 1MHz）/≤3mArms |
| Display accuracy | 0.1V/0.1A/1mA |
| Protection mode | Over-current, short circuit, over-temperature protection |
| Dissipation mode | air cooling |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 605D DC Power Supply”
-
Multimeters
UT61B Modern Digital Multimeters
UT61 Series Digital Multimeters are products designed for multi-functional, high precision, high performance and automatic measurements.
- 1、Large LCD screen；
- 2、High resolution analog pointer display；
- 3、Full range overload protection；
- 4、Data hold, REL, Peak value measurement；
- 5、Low battery indication, backlight, and sleep mode；
- 6、External interface supports RS-232C and USB cable.UT61Series can measure AC/DC voltage and current, resistance, diode, circuit continuity, capacitance, frequency, temperature, hFE, electromagnetic induction, etc.
UT61 Series complies with the standard IEC61010: CAT. III 1000V, CAT.IV 600V; they are widely used in Industrial Production and Service, Technological Research and Design, College Education (Laboratory, Courses), and Automotive Industry.
SKU: n/a -
Wire & Cable Testers
MS6812 Cable Tracker
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
● Sound and Light Instruction
● Cont and Tone LED LightApplications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a
Related products
-
DC Power Supplies
UTP 3305C DC POWER SUPPLY
Specifications Model UTP3305C Output voltage 0~30V (CH1/CH2) Output current 0~5A (CH1/CH2) Output power 315W Load regulation Voltage <0.01%+5mV Current <0.1%+10mA Line regulation Voltage <0.01%+3mV Current <0.1%+3mA Resolution Voltage 10mV Current 1mA Accuracy (25℃±5℃) Voltage <0.5%+20mV Current <0.5%+10mA Ripple (20Hz~20MHz) Voltage ≤2mVrms Current ≤3mArms Output temperature
coefficientVoltage ≤150ppm Current ≤150ppm Voltage rise delay ≤100ms (10% rated load) Parallel/Series load regulation ≤0.1%+0.1V CH3 output features Voltage 5V Current 3A Voltage accuracy ±50mV Load regulation ±50mV Interfaces USB Device, RS-232 General Characteristics Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz Display 4 windows, LED Product net weight 9.1kg Product size 260mm x 176mm x 317mm Standard accessories USB and RS-232 interface cables, output cables Standard individual packing Carton box Standard quantity per carton 1pcs Standard carton measurement 440mm x 388mm x 295mm Standard carton gross weight 10kg SKU: n/a -
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications Model UTP1310 Output voltage 0~32V Output current 0~10A Output power 320W Load regulation CV＜0.1%+5mV
CC＜0.2%+3mAPower regulation CV＜0.01%+5mV
CC＜0.2%+3mAOutput regulate resolution CV: 10mV (typical), CC: 1mA (typical) MTBF(e): ≥2000hrs Programming accuracy
(25℃±5℃)Voltage ＜0.1%+1digit Current ＜0.2%+3mA Ripple and noise
(20Hz~20MHz)Voltage ≤10mVrms Current ≤5mArms Display mode LED voltage and current dual display General Characteristics Power Input voltage: 110V AC/220V AC, 50Hz~60Hz Display EBTN LCD Product color White and grey Product size (W×H×D) 80mm x 150mm x 230mm Product net weight 2.5kg SKU: n/a
There are no reviews yet.