YIHUA 850 Hot Air Heat Gun Rework Station
Out of stock
Application
Applicable to desoldering of several types of elements: SOIC, CHIP, QFP, PLCC, BGA; the smaller the gun nozzle, the stronger of the force; suitable for desoldering of single soldering spots.
₨6,317 ₨7,897
Out of stock
CompareYH-850 Diaphragm pump hot air desoldering station
Product Features
1.Fine-control diaphragm pump is employed for powerful airflows; the smaller the nozzle of the gun, the stronger the airflow.
(a) Nozzles with diameters smaller than 5 mm and normal-sized nozzle (8 mm, 10 mm, 12mm) are suitable for use, we do not recommend use with larger nozzles. Since the pressure of the air pump is large, the smaller the nozzle the stronger the force, and even small nozzles are able to blow out the hot air from the handle.
(b) Characteristics of the diaphragm pump type airflow: large pressure and small volume (the maximum volume is 24 or 28 L/min)
(c) Applicable range:
The smaller the gun nozzle installed in the machine, the bigger the pressure and stronger the force, suitable for desoldering of single small soldering spots.
2.a cutting-edge ceramic-framed heating core for extremely stable and reliable performance!
3.The air gun handle wire employs a high-temperature silicone wire (undamaged when 300o soldering tip contacts silicone wire for 30 seconds)
| Weight | 3 kg |
|---|---|
| Dimensions | 26 × 19 × 13 cm |
Product parameters
| Performance Parameters of the Machine | |
| Rated Voltage | AC 220V±10% 50Hz |
| Total Power | 550W |
| working condition | 0～40℃ relative humidity ＜80％ |
| Operating Environment | －20～80℃ relative humidity ＜80％ |
| Dimensions | 255*188*125mm |
| Weight | 3.3KG |
| Temperature Range | 100℃～450℃ |
| air supply mode | Pump air supply |
| Air Flow | 24L/min(Max) |
| Temperature stability | ±15℃ （static state） |
| Heating element | Ceramic skeleton heater |
standard configuration
Desoldering station 1 Manual : 1
Air gun handle 1 Nozzle:3（5mm 8mm 10mm）
IC extractor 1 Holder 1
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 850 Hot Air Heat Gun Rework Station”
-
Oscilloscopes
UTD1025CL Handheld Digital Storage Oscilloscopes
Product Features:
1、 Fully Auto Scale; Vertical Scale and Timebase automatically adjusted with the signal and without any manual interference;
2、 Unique and powerful Auto Setup, quick and accurate to set up for signals with any DC component;
3、 Wider voltage measuring range; Coupled with 10×probe with attenuation up to 200V/div;
4、 Isolated USB for much safer communication;
5、 White and black display for your option, perfect for use outdoors with strong light;
6、 Intelligent local or network software update；
7、 More than 8hours of continuous battery operation.SKU: 80000 -
Distance Meter
LM 50A Laser Distance Meters
Features of LM A Series Laser Distance Meters
Certificates: CE, UKCA
● Ergonomic exterior, comfortable handling
● Millimeter accuracy
● 99 groups data storage
● Quick, self calculation with real-time readout
● Physical leveler(Horizontal and vertical)
● Multiple functions: Max/Min/continuous measurement, data storage, etcSKU: n/a -
Process Celibrators
UT725 Multifunction Process Calibrator
Features of UT725 Multifunction Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communication● Simultaneously measure and output different process signal in real time● Pressure measure with specified pressure modules, and sourcing pressure● Provides 24V loop power to transmitter while conducting mA current measurement at the same timeSKU: n/a -
Earth Ground Resistance Testers
UT521 Earth Groud Testers
UT520 series earth resistance tester hasthe functions of backlight display, low battery display, data hold, datastorage, auto power off and power saving. It can not only be used for accurate three-wiremeasurement but also simple two-wire measurement.
It is applicable to measuring the earthresistance of all kinds of electrical power system, electrical equipment and anti-thunderequipment. It can also measure the earth voltage. It is applicable to testingoperating earth systems of smelting, communication, manufacture, fossil oil,national defense, electricity, chemical industry and construction.
SKU: n/a
Related products
-
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Rework & Soldering Station
YH 899D-II REWORK STATION
PARAMETERSPower consumption 720W Gun Temperature range 100-480°C Gun heater material Ferro-alloys Gun heater resistance 74Ω Gun type Brushless Fan air flow 120L/min Soldering Iron Temperature range 200-480°C soldering Iron Type Blue Handle Soldering Iron Heater material Imported high-power heater Soldering Iron heater power 60W Gross weight 3.3KG/pcs Inner box Dimension(cm) 29*20*18 Outer box Dimension(cm) 59.5*41*36 QTY 8PCS PER outer carton SKU: n/a -
Rework & Soldering Station
YH 948D Soldering Iron
YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..
Features Of YIHUA 948D 130W High-frequency Desoldering Station:
- Adopts PID programmable temperature control technology
- Equipped with a suction pen to help remove IC.
- The anti-static design prevents electrostatic component damage or leakage.
- Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
- A portable built-in vacuum with strong suction does away with external vacuum systems.
SKU: n/a -
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a
There are no reviews yet.