-8%

ANALOG METER DE 360


Features Of Analog Multimeter DE360TRN:

  • Tests AC voltage, DC voltage, DC current, resistance, continuity and batteries.
  • 20kOhm/V DC sensitivity.
  • Mirrored scale.
  • With fuse overload protection circuitry incorporated.
  • Easy to read, colour-coded analogue displays.
  • Manual range selection.
  • Pocket-sized analogue tester.

1,700 1,853

Compare

Analog Multimeter DE360TRN

Analog Multimeter DE360TRN is easy to read, colour-coded analogue displays. Analog meter DE360TRN, you can use it to measure AC/DC voltage, DC current, resistance, diode check, continuity and transistor leak current, for DC current. This meter can measure as low as 10 microamps and up to 250 mA, which is hard to do with a digital multimeter. The acts as an ammeter with low series resistance to measure direct current. For measuring high current, we connect a shunt resistor across the galvanometer so that the current through the galvanometer does not cross its maximum allowed value. Here, a significant portion of the current to be measured bypasses through the shunt. With that shunt resistance, an analogue multimeter can measure even milli-ammeter or ammeter ranges of current.

Category:

Specifications Of Analog Meter DE360TRN Analog Ohmmeter:

  1. DCV: 0 – 0.1V ±1% 0.25V/2.5/10V/50V/250/1000 ±3%
  2. ACV: 0 -10/50/250/1000V ±4%
  3. DCA: 0 – 50µA/2.5mA/25mA/250mA ±3%
  4. Resistance: 0 – 2K/20K/200K/2M/20Mohm ±3% *dB: -10 dB – 22 dB
  5. Light: Diode check (including LED)
  6. Continuity: both Buzzer & flash
  7. Transistor leak current Features: All range fused
  8. Compact size
  9. Tilt back-stand
  10. Continuity flash
  11. 0-ohm adjustment

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ANALOG METER DE 360”

There are no reviews yet.

  • YH 907L IRON

    0 out of 5
    (0)
    SKU: n/a
  • UTD1050DL Handheld Digital Storage Oscilloscopes

    0 out of 5
    (0)

    Product Features:
    1、 Fully Auto Scale; Vertical Scale and Timebase automatically adjusted with the signal and without any manual interference;
    2、 Unique and powerful Auto Setup, quick and accurate to set up for signals with any DC component;
    3、 Wider voltage measuring range; Coupled with 10×probe with attenuation up to 200V/div;
    4、 Isolated USB for much safer communication;
    5、 White and black display for your option, perfect for use outdoors with strong light;
    6、 Intelligent local or network software update;
    7、 More than 6 hours of continuous battery operation.

    SKU: n/a
  • LKZ-1000 Wires and pipe locator

    0 out of 5
    (0)
    • Passive or active modes of tracing.
    • Detection of underground live wires.
    • Detection of underground wires with no voltage (radio mode).
    • Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
    • Tracing metallic or non-conductive pipes using an additional probe.
    • Tracing non-conductive pipelines using a “floating” probe.
    • Tracing a determined cable.
    • Determining the depth of a cable.
    SKU: n/a
  • UNI-T UTG4162A Function/Arbitrary Waveform Generator

    0 out of 5
    (0)
    bandwidth 160MHz
    Channels 2
    Sampling rate 500MS/s
    Waveforms Sine, square, ramp, harmonic, pulse, noise, DC voltage, arbitrary
    Working modes Output on/off, continuous, modulation, sweep, burst
    Modulations AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM
    Frequency Characteristics
    Sine 1μHz~160MHz
    Square/Pulse 1μHz~50MHz
    Slope 1μHz~4MHz
    Harmonic 1μHz~80MHz
    Noise (-3dB) 160MHz bandwidth
    Resolution 1μHz
    Arbitrary Waveform
    Frequency range 1μHz~40MHz
    Length 8~32Mpts
    Vertical resolution 16 bits
    Min rise/fall time (typical: 1Vpp) <5ns
    General Characteristics
    Power 100V~240V ACrms, 50Hz/60Hz
    Display 8-inch TFT LCD, WVGA (800 x 480)
    Product color White and grey
    Product net weight 3.5kg
    Product size 336mm x 164mm x 108mm
    Standard accessories BNC-BNC cable x 2, USB interface cable, PC software CD, power cord
    Standard individual packing Carton box
    Standard quantity per carton 1pcs
    Standard carton measurement 405mm x 225mm x 265mmv
    SKU: n/a
  • UT60EU

    0 out of 5
    (0)

    Product size
    Standard individual packing
    Product net weight
    Batery
    Product color
    1.5V AAA x 3
    Red and gray
    290g
    169 x 81 x 46mm
    420 x 320 x 300mm

    AC voltage (V)
    DC current (A)
    AC current (A)
    Resistance (Ω)
    Capacitor (F)
    Frequency (Hz)
    Duty cycle (%)
    Temperatue (°C/°F)
    Bluetooth
    Display count
    Auto range
    REL
    NCV
    Diode

    SKU: n/a
  • UT622A Digital Inductance LCR Meter

    0 out of 5
    (0)
    Specifications UT622A UT622C UT622E
    Certificates CE, RoHS
    Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
    Test signal level  0.1Vrms, 0.3Vrms, 1Vrms
    Output impedance 100Ω
    Measurement parameters Primary: L/C/R/Z
    Secondary: D/Q/θ/ESR
    Primary: L/C/R/Z/DCR  Secondary: D/Q/θ/ESR
    Auto LCR
    Test terminals Three-terminal test jacks, five-terminal test sockets
    Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    DCR test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    Ranging mode Auto/hold
    Tolerance range 1%~20%
    Testing circuit mode Series/parallel mode
    Clearing correction Open/short circuit
    Fuse of test ports 0.1A/250V
    Communication interface Mini-USB
    LED alarm for tolerance
    (pass: green; fail: red)
    Display range
    Maximum reading 99999
    Minimum resolution 0.0001
    Maximum accuracy 0.001
    L 0.00μH~99.999H
    C 0.00pF~99.999mF
    Z/R 0.0000Ω~9.9999MΩ
    ESR 0.0000Ω~999.99Ω
    D 0.0000~9.9999
    Q 0.0000~99999
    θ -179.9°~179.9°
    DCR 0.01mΩ–20.000MΩ
    Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C)
    General Characteristics
    Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A
    Display 2.8′ TFT LCD 320X240
    Product net weight 420g
    Product size 93mm x 192mm x 44mm
    Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual
    SKU: n/a