-14%

ANALOG MULTIMETER DEG 360


1,400 1,635

Compare

Greenfield 360 Analog Multimeter

Product Description

A multimeter or a multitester, also known as a volt/ohm meter or VOM, is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter may include features such as the ability to measure voltage, current and resistance. Multimeters may use analog or digital circuits—analog multimeters and digital multimeters (often abbreviated DMM or DVOM.) Analog instruments are usually based on a microammeter whose pointer moves over a scale calibration for all the different measurements that can be made; digital instruments usually display digits, but may display a bar of a length proportional to the quantity measured. A multimeter can be a hand-held device useful for basic fault finding and field service work or a bench instrument which can measure to a very high degree of accuracy. They can be used to troubleshoot electrical problems in a wide array of industrial and household devices such as electronic equipment, motor controls, domestic appliances, power supplies, and wiring systems.

Category:

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ANALOG MULTIMETER DEG 360”

There are no reviews yet.

  • MRU-10 Earth Resistance Meter

    0 out of 5
    (0)

    It allows to:

    • measure earthing resistance using auxiliary electrodes,
    • measurement of resistance of auxiliary electrodes RS and RH,
    • measurement of interference voltage,
    • measurement in the presence of interference voltage in the power network with frequency 50 Hz and 60 Hz,
    • selection of maximum measuring voltage (25 V and 50 V),
    • indication of battery state.
    SKU: n/a
  • UT622A Digital Inductance LCR Meter

    0 out of 5
    (0)
    Specifications UT622A UT622C UT622E
    Certificates CE, RoHS
    Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
    Test signal level  0.1Vrms, 0.3Vrms, 1Vrms
    Output impedance 100Ω
    Measurement parameters Primary: L/C/R/Z
    Secondary: D/Q/θ/ESR
    Primary: L/C/R/Z/DCR  Secondary: D/Q/θ/ESR
    Auto LCR
    Test terminals Three-terminal test jacks, five-terminal test sockets
    Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    DCR test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    Ranging mode Auto/hold
    Tolerance range 1%~20%
    Testing circuit mode Series/parallel mode
    Clearing correction Open/short circuit
    Fuse of test ports 0.1A/250V
    Communication interface Mini-USB
    LED alarm for tolerance
    (pass: green; fail: red)
    Display range
    Maximum reading 99999
    Minimum resolution 0.0001
    Maximum accuracy 0.001
    L 0.00μH~99.999H
    C 0.00pF~99.999mF
    Z/R 0.0000Ω~9.9999MΩ
    ESR 0.0000Ω~999.99Ω
    D 0.0000~9.9999
    Q 0.0000~99999
    θ -179.9°~179.9°
    DCR 0.01mΩ–20.000MΩ
    Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C)
    General Characteristics
    Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A
    Display 2.8′ TFT LCD 320X240
    Product net weight 420g
    Product size 93mm x 192mm x 44mm
    Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual
    SKU: n/a
  • LM576LD Laser Levelers

    0 out of 5
    (0)

    Features of LM576LD  Laser Levelers

    Certificates 576LD

    ● Osram LD green laser
    ● Self-leveling mode & manual mode
    ● Outdoor pulse mode

    ● 5200mAh Li-ion battery
    ● Type-C DC-in port
    ● Complimentary bracket

    SKU: n/a
  • UNI-T UTi260B Handheld Thermal Imaging Camera Real Time Thermal Imager with Buzzer Flashlight Alarm 2.8′′ LCD Display

    0 out of 5
    (0)
    Features of UTi260B Thermal Imaging Camera
    • 2.8″ TFT screen
    • Infrared resolution: 256 x 192
    • Temperature measurement range: -15ºC~550ºC
    • Photograph function with SD card storage
    • PC analysis software
    • Buzzer/flashlight alarm
    • Real-time image transmission
    • Auto capture of High/Low temperature
    • Flashlight
    • 1/4″ tripod mounting hole
    • IP65/2m drop proof
    SKU: n/a
  • UT-CS09D Flex Clamp Sensor

    0 out of 5
    (0)

    Features of UT-CS09D Flex Clamp Sensor

    Certificates: CE, UKCA, cETLus

    ● Flex clamp can measure from 1.5A to 3000A current

    ● 1m drop proof
    ● Robust terminal connection
    ● Directly displays current when connected to UT206B/208B
    SKU: n/a
  • UT658 USB Tester

    0 out of 5
    (0)

    Features

    1. 10 sets of data storage

    2. High/Low output voltage warning

    3. LCD backlight

    4. Light weight, portable

    SKU: n/a