Clamp Meter DT 3266
Out of stock
- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
₨811 ₨1,308
Out of stock
Compare- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
| Weight | 0.3 kg |
|---|---|
| Dimensions | 15 × 7 × 4 cm |
| FUNCTION | MEASURING RANGE | ACCURACY | ||
| DCV | 200mv/2v/20v/200v | ±(0.8%+2) | ||
| 600v | ±(1.0%+2) | |||
| 400mv/4v/40v/400v | ±(0.8%+2) | |||
| 600v | ±(1.0%+2) | |||
| ACV | 2V/20V/200V | ±(1.0%+5) | ||
| 600V | ±(1.2%+5) | |||
| 400mv/4v/40v/400v | ±(1.0%+10) | |||
| 600V | ±(1.2%+10) | |||
| ACA | 2A/20A | ±(3.0%+10) | ||
| 200A | ±(2.5%+10) | |||
| 4A/40A/400A | ±(2.5%+10) | |||
| 600A | ±(1.5%+5) | |||
| Ω | 200Ω/2KΩ/20KΩ/200KΩ/2MΩ | ±(1.2%+2) | ||
| 20MΩ | ±(2.0%+5) | |||
| 400Ω/4KΩ/40KΩ/400KΩ/4MΩ | ±(1.2%+2) | |||
| 40MΩ | ±(2.0%+5) | |||
| CX | 200uf | ±(4.0%+10) | ||
| HZ | 0∞10MHZ | ±(2.0%+5) | ±(1.5%+15) | |
| °C | – 20°C ≤ 750°C | ±(2%+2) | ||
| FEATURE | ||||
| LCD | DIGITS | 1999 | 3999 | |
| Clamp Size | Opening | 30mm | 30mm | |
| Test Range | Ac voltage/dc voltage/AC-DC current,resistance | • | • | |
| Capacitance/frequency/duty cycle/temperature | • | |||
| Power | 3X1.5v AAA | |||
| Weight | 133.5g | |||
| Security | CE,ETL,CATIII 600V ROHS | |||
Brand
SZBJ
Based on 1 review
Add a review
-
Multimeters
VC 9205A DMM
Feature:
- Maximum voltage between terminals and earth ground: 1000DC or 700VAC
- Fuse proteciton: F 200mA/250V
- Power: 9V battery, NEDA 1604 0r 6F22
- Display: LED
- Operating temperature: 0~40℃
- Storage temperature: -10~50℃
- AC Voltage (V): 200mV, 2V, 20V, 200V, 700V
- DC Voltage (V): 200mV, 2V, 20V, 200V,1000V
- AC Current (A): 2mA, 20mA, 200mA, 20A
- DC Current (A): 2mA, 20mA, 200mA, 20A
SKU: n/a -
Wire & Cable Testers
UT681HDMI Cable Tester
1. Tests HDMI/MINI-HDMI cables
2. Fastline collocation type: A with A, A with C and C with C
3. Checks circuit breakage, short circuit, cross circuit and the missing wire
4. 20 visible LED indicators
5. Can toggle between scan and full display test modes
6. Single key operation
7. Manual/auto power off (after 10-minute inactivity)
8. Low battery indication
9. CE certification
10. Power supplied by 9V layer-built battery
SKU: n/a
Related products
-
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Clamp Meters
UT219E ACA Professional Clamp Meters
Features
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
SKU: n/a -
Clamp Meters
UT216B 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216B (main features)- 1、600A AC current measurement；
- 2、True RMS response for ACV and ACA；
- 3、99.99mF capacitance measurement；
- 4、V.F.C function for measuring signal at variable frequency ；
- 5、Non-contact voltage detection with LED indication；
- 6、Flashlight for working at dark environment.
SKU: n/a -
Clamp Meters
UT210E ACA DCA Digital Clamp Meters
Main Features
1. Auto range, 2~3/s sampling rate
2. True RMS measurement
3. VFC, frequency conversion function
4. NCV, Non-Contact Voltage testing function:induce electric field strength via the jaw
5. Zero mode
6. LCD backlight, data hold
7. Auto power off, low battery indication and overload protection
8. Comfortable to hold and easy to carry with (Product weight: 160g/170g)
9. Complies with CE (European Union) directives
SKU: n/a
Zafar Ayyub –
Dt3266 clampmeter
Zafar Ayyub –