-5%

LKZ-720 Wires and pipe locator

Availability:

2 in stock


Features:

  • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
  • phase detection mode,
  • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
  • a LED bright torch,
  • headphone socket in receiver,
  • screens backlight for work in dark,
  • transmission battery status and settings of the transmitter to the receiver
  • operation in wide range of rated voltage, up to 500V RMS,
  •  measurement of voltage at the object to 500 Vrms,
  • three levels of transmitter amplification,
  • automatic or manual selection of transmitter operation modes,
  • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
  • software upgrade via USB,
  • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.

200,000 210,000

2 in stock

Compare
  • Detection of wires and cables (live or not)
    • detection of cables in ceilings, walls and floors,
    • detection of breaks in cables,
    • tracing cables in building installation,
    • locating power points and switches in buildings,
    • locating short circuits between leads,
    • tracing shielded cables,
    • tracing cables in metal ducts.
  • Identification of fuses on the distribution board.
  • Tracing underground cables.
  • Tracing conductive water and heating pipelines.
  • Non-contact detection of live cables.

Electric security:

  • type of insulation: double, according to EN 61010-1
  • measurement category: CAT III 600V acc. to EN 61010-1
  • transmitter’s protection class acc. to EN 60529: IP67
  • receiver’s protection class acc. to EN 60529: IP40

Other technical data:

  • transmitter’s power supply: four AA alkaline battery or NiMH rechargeable battery
  • transmitter’s max working voltage: 500 Vrms (707 Vampl)
  • detector’s max range („I” mode) 2m
  • non-contact neon max range: 20 cm (in air), 3 cm (in concrete)
  • receiver’s power supply: battery 9V 6LR61 alkaline

Rated operational conditions:

  • operating temperature -10°C…+50°C

Brand

SONEL

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LKZ-720 Wires and pipe locator”

There are no reviews yet.

  • UT347A Leeb Hardness Tester

    0 out of 5
    (0)

    Features of UT347A Leeb Hardness Tester

    Certificates: CE (In processing), UKCA

    ● 6 kinds of hardness values (HL, HB, HRC, HRB, HV, HS) is a real-time measurement
    ● One hardness tester can be equipped with 7 different impact devices
    ● Automatic identification without calibration when replacing impact device
    ● Statistical, multi-unit, line chart, histogram 4 measurement modes
    ● Camera: 640×480 pixels (900 BMP format pictures could be stored)
    ● Automatic alarm when the upper and lower limits are exceeded
    ● Adjustable backlight brightness
    ● Mobile phone Bluetooth APP and PC software analysis data
    ● Support thermal printing
    ● Tri-color LED indication and LED flashlight
    SKU: n/a
  • MRU-30 Earth Resistance and Resistivity Meter

    0 out of 5
    (0)

     

    • It allows to take the measurements of:

      • earthing resistance using auxiliary electrodes,
      • earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
      • earthing resistance using double clamps for measuring multiple earthing without underground connections.
      • ground resistivity (Wenner method),
      • continuity of equipotential bondings and protective
      • conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.

      Additionally:

      • measurement of resistance of auxiliary electrodes RS and RH,
      • measurement of interference voltage,
      • measurement in the presence of interference voltage in the power network
      • with frequency 50Hz, 60Hz,
      • selection of maximum measuring voltage (25V and 50V),
      • introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
      • memory of 990 measurements (10 banks of 99 cells each),
      • calibration of clamp used,
      • data transmission to the computer (USB),
      • indication of battery state.
    SKU: n/a
  • UT395C Professional Laser Distance Meter

    0 out of 5
    (0)

    UT395 series are professional laser distance meters with color LCD display, electronic multi-axis leveler and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.

    SKU: UN39C5T
  • JM OP020 OPENING TOOL

    0 out of 5
    (0)
    SKU: n/a