-5%

UT195E Professional Digital Multimeters


Features

1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

2. Large 6000-count LCD screen

3. True RMS

4. ACV 750V 5kHz bandwidth

5. Flashlight

6. Auto LCD backlight controlled by light sensor (can be turned off)

7. LoZ voltage test, for ghost voltage measurement

8. 20A current measurement (max 30 seconds)

9. 31 analogue bar

27,500 29,025

Compare

Features

1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

2. Large 6000-count LCD screen

3. True RMS

4. ACV 750V 5kHz bandwidth

5. Flashlight

6. Auto LCD backlight controlled by light sensor (can be turned off)

7. LoZ voltage test, for ghost voltage measurement

8. 20A current measurement (max 30 seconds)

9. 31 analogue bar

Category:
Weight 0.5 kg
Dimensions 21 × 10 × 6 cm
Specifications Range Best Accuracy
Model UT195E
DC voltage 600mV ~ 1000V ±(0.5%+3)
AC voltage 600mV ~ 750V ±(0.7%+3)
LoZ ACV 600.0V ±(2.0%+3)
DC current (A) 600.0μA ~ 20A ±(0.8%+3)
AC current (A) 600.0μA ~ 20A ±(1.0%+3)
Resistance (Ω) 600.0Ω ~ 60.00MΩ ±(0.8%+2)
Capacitance 6.000nF ~ 60.00mF ±(3%+5)
Frequency 60.00Hz ~ 10.00MHz ±(0.1%+4)
Duty ratio 0.1% ~ 99.9% ±(2.0%+5)
Features
Display count 6000
Display interface (HTN) Single display
Measurement of digital conversion rate times/s 3
Measurement of analogue bar conversion rate times/s 10
Analogue bar 31 section
True RMS
AC voltage frequency response 45 ~ 400Hz
AC current frequency response 45 ~ 400Hz
Low pass filter test √ (1kHz 3dB attenuation)
Diode/Continuity test 3.5V
Auto/Manual range
Auto power off
Continuity buzzer
Low battery indication
Data hold
MAX/MIN
Functional selection
Electrical torch
Auto backlight
Working temperature 0 °C ~40 °C
2m drop proof
Protection grade IP65
General Characteristics
Power supply 9V 6F22 carbon-zinc or 6LR61 alkaline battery
LCD size 66mm × 51mm
Device color Red and grey
Device weight 473g
Device size 195mm × 95mm × 58mm
Standard accessories Testing probes, battery, carrying bag
Standard individual packing Gift box, user manual

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT195E Professional Digital Multimeters”

There are no reviews yet.

  • UT251C High Sensitivity Leakage Current Clamp Meter

    0 out of 5
    (0)

    1. 4-digit LCD digital display, 10000 display count

    2. Auto range, 2/s sampling rate
    3. Peaks hold
    4. Store 99 sets of data
    5. RS-232 interface
    6. Data hold
    7. Auto power off
    8. Overload indication, low battery indication
    SKU: n/a
  • TDR-410 Cable Fault Locator

    0 out of 5
    (0)
    • Features:

      • automatic or manual mode:
        • the automatic fault location (AFL),
        • mode with manual range selection and sensitivity,
        • single measurement triggered manually or scanning continuous,
      • 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
      • maximum length of cable up to 4000 m one end of the cable,
      • “Dead zone” measure limited to 0.5 m,
      • 2.5 “LCD screen with backlight,
      • scan automatically or manually trigger,
      • sensitivity set manually or automatically adjusted,
      • adjustable impedance matching,
      • propagation coefficient adjustment 1% to 99%,
      • waterproof and resistant to mechanical housing.
      • small size and weight.
      • economical power system – 30 hours of continuously scan on one battery set..

      Accessories:

      • 0,6 m double-wire lead: WAPRZ0X6DZBB
      • red crocodile clip: WAKRORE20K02
      • Krokodylek czarny: WAKROBL20K01
      • cover M-2: WAFUTM2
    SKU: n/a
  • UPO2102CS Ultra Phosphor Oscilloscope

    0 out of 5
    (0)

    Features and Benefits:
    1、Sample Rate up to 1GS/s;
    2、Channels 2/;
    3、Bandwidth 100MHz,;
    4、Memory Depth 32Mpts(Standard);
    5、Waveform Capture Rate up to 30,000wfms/s;
    6、With 256 level intensity grading display;
    7、Up to 65,000 frames for Waveform Record ,Replay;
    8、Support serial bus trigger and decoding;
    9、8 inches, TFT LCD,WVGA(800*480);
    10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

    SKU: UT21P02CSO
  • TND 3000VA

    0 out of 5
    (0)

    Input Voltage=140-250
    Output Voltage=220
    Copper Wind
    Analog Display
    Under and Over Volt Indication
    Under Volt Protection
    Dual Output Socket 110/220

    SKU: n/a
  • Fluke 18B+ Digital Multimeter

    0 out of 5
    (0)

    Feature:

    -New Function:Frequency Test

    -New Desgin: A Large LCD than FLUKE 18B, with a high brightness LCD Back light

    -Two Mode LED Test :

    -DMM LED Socket Test Mode .

    -UUT(PCBA) LED Test Mode(using test lead).

    -Light up LED without considering the polarity.

    -Voltage,Resistance,Continuity Testing,Capacitance Test.

    -Data Hold,Diode Test.

    -Frequency and Duty Cycle.

    -MAX Input Current 10A.

     

     

    SKU: n/a