UT50C Modern Digital Multimeters
19 in stock
UT 50-II SERIES digital multimeter UT-50C with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light.
₨3,300 ₨3,643
19 in stock
CompareUT 50-II SERIES digital multimeter UT-50C with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light
.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 16 × 8 × 4 cm |
| Specifications | Range | Best Accuracy |
| Model | UT50C | |
| DC Voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.5%+1) |
| AC Voltage (V) | 2V/20V/200V/750V | ±(0.8%+3) |
| DC Current (A) | 20mA/200mA/20A | ±(0.8%+1) |
| AC Current (A) | 20mA/200mA/20A | ±(1%+3) |
| Resistance (Ω) | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ | ±(0.8%+1) |
| Capacitance (F) | 20nF/200nF/2μF/100μF | ±(4%+3) |
| Temperature (°F) | -40oF~1832oF | ±(1%+4) |
| Temperature (°C) | -40℃~1000℃ | ±(1%+3) |
| Frequency (Hz) | 2kHz/20kHz | ±(1.5%+5) |
| Features | ||
| Full Icon Display | √ | |
| Diode | √ | |
| Continuity Buzzer | √ | |
| Low Battery Display | √ | |
| Input Impedance for DC Voltage Measurement | 10MΩ | √ |
| Data Hold | √ | |
| Display Backlight | Auto | √ |
| Max. Display | 1999 | √ |
| Auto Power Off | √ | |
| General Characteristic | ||
| Power | 9V Battery (6F22) | |
| LCD Size | 95mm×25mm | |
| Product Colour | Red and Grey | |
| Product Net Weight | 275g | |
| Product Size | 165mm×80mm×38.3mm | |
| Standard Accessories | Test Lead, Battery, Point Contact Temperature Probe, Test Clip | |
| Standard Carton Gross Weight | 20.5kg | |
| Optional Accessories* | Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2) | |
Brand
UNI T
Based on 2 reviews
Add a review
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Distance Meter
LM 100A Laser Distance Meters
Features of LM A Series Laser Distance Meters
Certificates: CE, UKCA
● Ergonomic exterior, comfortable handling
● Millimeter accuracy
● 99 groups data storage
● Quick, self calculation with real-time readout
● Physical leveler(Horizontal and vertical)
● Multiple functions: Max/Min/continuous measurement, data storage, etcSKU: n/a -
Digital Multi Meter
UT372D 2-in-1 Tachometer
UT372D 2-in-1 Tachometer is a reliable and safe tachometer, which combines contact and non-contact measurement modes. It is mainly used to measure Revolutions Per Minute(RPM) , frequency, surface velocity and length in the fields of motors, fans, automobiles, papermaking, etc.
SKU: n/a -
Earth Ground Resistance Testers
UT278A Clamp Earth Ground Testers
UT270 series is widely used in earth ground and circuit resistance measurements of electric power, telecommunications, meteorology, oil field, construction and industrial electrical equipment. It can measure the ground system of the circuit without disconnecting grounding wires, auxiliary electrode. UT278A can also measure leakage current and neutralline current of earth ground system
.
SKU: n/a
Related products
-
Multimeters
UT890D Digital Multimeter
Product Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
SKU: n/a -
Talha Saghir (verified owner) –
meter received Mashallah everything is fine
Great packaging no damage happened
Talha Saghir –
admin (store manager) –
Thank you very much for review, Martpakistan is always with to give you quality products
admin –
Talha Saghir (verified owner) –
Great Product and especially great service contacted on WhatsApp and they were very cooperative in every mean highly recommend 💯.
Talha Saghir –