UT58C General Digital Multimeter
20 in stock
1. 2000 display count, refresh rate 2~3 times/s
₨8,400 ₨8,711
20 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 18 × 9 × 4 cm |
Specifications | Range | UT58C |
DC voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.5%+1) |
AC voltage (V) | 2V/20V/200V/750V | ±(0.8%+3) |
DC current (A) | 2mA/200mA/20A | ±(0.8%+1) |
AC current (A) | 2mA/200mA/20A | ±(1%+3) |
Resistance (Ω) | 200Ω/2kΩ/20kΩ/2MΩ/20MΩ | ±(0.8%+1) |
Capacitance (F) | 2nF/200nF/100μF | ±(4%+3) |
Frequency (Hz) | 2kHz/20kHz | ±(1.5%+5) |
Temperature (°C) | -40°C~1000°C | ±(1%+3) |
General Characteristics | ||
Power | 9V battery (6F22) | |
Display | 60mm x 54mm | |
Product color | Red and grey | |
Product net weight | 350g | |
Product size | 179mm x 88mm x 39mm | |
Standard accessories | Battery, test leads, holster, multi-purpose socket, point contact temperature probe | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 20pcs | |
Standard carton measurement | 450mm x 330mm x 340mm (0.11CBM per standard carton) | |
Standard carton gross weight | 12kg |
Based on 0 reviews
Be the first to review “UT58C General Digital Multimeter”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Watt Meter
UT231 Digital Power Clamp Meters
UT 230 series is a handheld intelligent power clamp meter, which combines with digital current meter and power meter. It is equipped with powerful measurement and data processing software, which can help complete measurements, calculations and displays of voltage, current, active power, power factor, phase angle, apparent power, reactive power, power, frequency, temperature and other parameters.
SKU: n/a -
Function Generators
UNI-T UTG4162A Function/Arbitrary Waveform Generator
bandwidth 160MHz Channels 2 Sampling rate 500MS/s Waveforms Sine, square, ramp, harmonic, pulse, noise, DC voltage, arbitrary Working modes Output on/off, continuous, modulation, sweep, burst Modulations AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM Frequency Characteristics Sine 1μHz~160MHz Square/Pulse 1μHz~50MHz Slope 1μHz~4MHz Harmonic 1μHz~80MHz Noise (-3dB) 160MHz bandwidth Resolution 1μHz Arbitrary Waveform Frequency range 1μHz~40MHz Length 8~32Mpts Vertical resolution 16 bits Min rise/fall time (typical: 1Vpp) <5ns General Characteristics Power 100V~240V ACrms, 50Hz/60Hz Display 8-inch TFT LCD, WVGA (800 x 480) Product color White and grey Product net weight 3.5kg Product size 336mm x 164mm x 108mm Standard accessories BNC-BNC cable x 2, USB interface cable, PC software CD, power cord Standard individual packing Carton box Standard quantity per carton 1pcs Standard carton measurement 405mm x 225mm x 265mmv SKU: n/a -
There are no reviews yet.