- Location damaged power cables.
- Fault location copper telecom cables.
- Coaxial cable fault location.
- Fault location wiring infrastructure.
- Detection of breaks, short circuits, damage caused by dampness and other changes in impedance of the cable.
- Graphic depiction of damage the cable with automatic indication the distance to fault on the screen.
TDR-410 Cable Fault Locator
Out of stock
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
₨0
Out of stock
CompareDechnical data:
- Ranges Meters: 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 4km
- Ranges Feet: 20, 45, 90, 180, 360, 750, 1500, 3000, 6000, 10000, 14000.
- Range Selection: Manual range control / Auto range.
- Accuracy: 1% of selected range*.
- Resolution: Approx 1% of range.
- Minimum cable lenght: 4m (14ft).
- Sensitivity: Min 3 pixel return at 4km on 0.6mm Ø, PE, TP.
- Velocity Factor: Adjustable from 1% to 99%.
- Output Pulse: 5 volts peak to peak into open circuit.
- Output Impedance: Selectable 25, 50, 75 & 100 Ω.
- Output Pulse: Width 3 ns to 3 µs, Automatic with range.
- Scan Rate: 2 scans/second or scan held, pre set for each range scale.
- Tone Generator: 810 – 1100Hz.
- Battery Life: 30 hours continuous scanning.
- Power Supply: 6 volts 4 x 1.5 AA Alkaline cells, on-screen low voltage indicator.
- Power Down Selectable: 1, 2, 3, 5 minutes or disabled.
- Back Lit Display: 128 x 64 pixel.
- Voltage Protection: 250 volts AC.
- Operating Temp: -10º / 50ºC.
- Storage Temp: -20º +70° C.
- Dimensions: 165 x 90 x 37 mm (6.5 x 3.5 x 1.5 ins).
- Weight: 350 g (12oz).
- Safety: IEC 61010-1, EN 60950.
- EMC: BS/EN 61326-1.
- Water/Dust Proof: IP54
Based on 0 reviews
Be the first to review “TDR-410 Cable Fault Locator”
-
Thermal Imagers
KT-80 Thermal Imager
Features and benefits of Sonel KT:
- Friendly UI, easy to use without training,
- Affordable as entry level diagnostic tool,
- Removable large capacity Li-ion battery,
- 4 hour working time,
- 3,5’’ large screen with no image cropping, high brightness screen to show image with no detailed information lost even outdoor or in highlight,
- Rugged and compact design, metal internal structure,
- Standard Micro USB interface for data transmission and charging,
- Wi-Fi connection (Optional).
SKU: n/a -
Insulation Resistence Tester
UT516B Insulation Resistance Tester
Features of UT516B Insulation Resistance Tester
● AC/DC voltage
● USB data transfer● Low battery indication● Data storage● LCD backlight● Polarization Index● Over-range alarm● 9999 Max display● Comparative measurement● Measurement time selectionSKU: n/a -
Multimeters
ET 8102 DMM
Specifications:
Model:ET8102
Display:5999 Counts
Color:Black
DC Voltage:6V/60V/600V±(0.5%+3),1000V±(0.8%+10)
AC Voltage:6V/60V/600V±(0.8%+3),750V±(1.2%+10)
DC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
AC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
Resistance:600Ω±(0.8%+5),6KΩ/60KΩ/600KΩ/6MΩ±(0.8%+3),40MΩ±(2.5%+3)
Capacitance:60nF/600nF/6μF/60μF/600μF±(3.5%+20),6mF/30mF±(5.0%+3)
Frequency:10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz±(0.1%+3)
Temperature:-20℃~1000℃,±(1.0%+5)<400℃,±(1.5%+15)≥400℃
0℉~1832℉,±(0.75%+5)<750℉,±(1.5%+15)≥750℃
NCV test:Yes
Zero line/fire wire:Yes
Duty cycle:Yes
Diode test:Yes
Continuity testing:Yes
Backlight:Yes
Date hold:Yes
True RMS:Yes
Max/Min value measurement:Yes
Flashlight:Yes
Auto power off:Yes
Low battery indication:Yes
Over range indication:Yes
Power:2 x 1.5V AAA Battery (not included)
Product Size:142 x 68 x 32 mm
Product Net Weight:187gPackage Information:
Package Size:16.5 x 10 x 5cm / 6.5 x 3.9 x 2in
Package Weight:295g / 10.4 ozPackage list:
1 x Digital Multimeter
2 x Test Leads Pens
1 x User Manual
• 1.Multifunction:Can measure AC/DC voltage,AC/DC current,resistance,capacitance,
• 2.Portable design:Small and can be put into pocket,easy to carry.
• 3.Wide range of applications:It’s a perfect tool for the laboratory,factory and home.
• 4.Easy to use & clear to read:With large LCD backlight display and flashlight function,convenient to read data in dark.
• frequency,duty cycle,temperature,NCV,diode,continuity,zero line/fire wire.SKU: n/a
There are no reviews yet.