-19%

UT333-Mini Temperature Humidity Meter

Availability:

19 in stock


UT333 is a mini digital temperature humidity meter which adopts high-precision temperature humiditiy sensing module technology to sample, processes data, and displays results on the LCD. it uses calibrated sensing module which reduces bias and increases accuracy. It is light weight, compact, ergonomic, and user friendly, making it a great tool for monitoring indoor farming, animal husbandry, warehouse storage, public facilties, and many other areas.

4,600 5,696

19 in stock

Compare

UT333 is a mini digital temperature humidity meter which adopts high-precision temperature humiditiy sensing module technology to sample, processes data, and displays results on the LCD. it uses calibrated sensing module which reduces bias and increases accuracy. It is light weight, compact, ergonomic, and user friendly, making it a great tool for monitoring indoor farming, animal husbandry, warehouse storage, public facilties, and many other areas.

Category:
Weight 0.1 kg
Dimensions 15 × 5 × 3 cm
Functions Range Resolution Accuracy
Humidity 0~99%RH 0.1%RH ±5%RH(0~99%RH)
Temperature -10~60℃ 0.1℃ ±1.0℃
14~140℉ 0.2℉ ±2.0℉
Sampling Rate 0.5s
Overload Indication OL
MAX/MIN MAX/MIN
Data Hold HOLD
Unit Conversion ℃/℉
LCD Backlight Yes
Auto Power Off 5min
Low Battery Indication 3.0~3.5V
Battery 4.5V
Current Consumption working mA ≤25mA
Power off uA ≤10uA
Working Environment temperature 0~40℃
humidity ≤80%RH
Storage Environment temperature 20~60℃ below
humidity ≤75%RH
Key Functions
ON/OFF Short press: power on/off
MAX/MIN Short press to switch between MAX/MIN/QUIT
℃/℉ Short press to switch between ℃/℉
HOLD/BL Short press to start data hold mode, long press to turn on/off backlight

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT333-Mini Temperature Humidity Meter”

There are no reviews yet.

  • UT262A Non-Contact Phase Detector

    0 out of 5
    (0)

    UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.

    SKU: 22000
  • SOLDERING IRON WOOD 300W BLUE

    0 out of 5
    (0)

    SOLDERING IRON WOOD 300W BLUE

    SKU: n/a
  • ,

    JM-6118 33 in 1 Screwdriver Tool Set

    0 out of 5
    (0)

    Main Features:
    • Shank: 130mm, tweezers: 118mm, extension soft bar: 120mm.
    • Dismantling and precision screwdriver bit.
    • Convenient for storaging and carrying.

    SKU: n/a
  • JM OP017 OPENING TOOL

    0 out of 5
    (0)
    SKU: n/a
  • PQM-707 Power Quality Analyzer

    0 out of 5
    (0)
    • Features:

      • 7″ touch screen – intuitive operating
      • CAT IV 600V – high safety
      • all parameters acc. to class S – high accuracy of measurements
      • Li-Ion rechargeable battery – higher mobility
      • removable memory card – recording data with no restrictions

      Possible measurements:

      • Measurements according to EN 50160,
      • Voltage L1, L2, L3, N-PE (five inputs),
        – average, minimum, maximum values, range to 760 V, ability to work with voltage transformers,
      • Current L1, L2, L3, N (four inputs),
        – average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers,
      • Crest factor for voltage and current,
      • Frequency from 40 Hz to 70 Hz ,
      • Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
      • Power recording:
        • Budeanu method,
        • IEEE 1459,
      • Active, reactive, apparent energy,
      • Power factor, cosφ, tgφ,
      • Up to 50th harmonics for voltage and current,
      • Total Harmonic Distortion (THD) for voltage and current,
      • Short-term (PST) and long-term (PLT) flicker,
      • Unbalance of voltage and current,
      • Current and voltage events registration including waveforms and RMS graphs half period,
      • Inrush current
      • Calculator of energy tariffs
      • ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
    SKU: n/a