Environment Meters
UT658B USB Tester
UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power. Users can use these devices to monitor charging status of any USB powered device.
₨2,640 ₨2,700
UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power.
Applications:
Users can use these devices to monitor charging status of any USB powered device.
Specifications | UT658B |
Input voltage range (V) | 3V~9V |
Voltage resolution | 0.01V |
Voltage monitoring accuracy | ±(1%+5) |
Current monitoring range (A) | 0A~3.5A |
Current monitoring accuracy | ±(1%±5) |
Current resolution | 0.01A |
Capacity | 0~39999mAH |
Capacity data storage | 10 sets |
Display | LCD |
Warning | √ |
Button | √ |
Cable length | 10cm |
Pollution level | 2 |
Working temperature | -10℃~40℃ |
Storage temperature | -10℃~50℃ |
Relative humidity | <75% |
General Characterisitics | |
Product color | White |
Product net weight | 30g |
Product size | 72mm x 29mm x 12mm |
Standard individual packing | Gift box |
Standard quantity per carton | 60pcs |
Standard carton measurement | 205mm x 170mm x 170mm |
Standard carton gross weight | 2.3kg |
Based on 0 reviews
Be the first to review “UT658B USB Tester”
-
Oscilloscopes
UPO2102CS Ultra Phosphor Oscilloscope
Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 2/;
3、Bandwidth 100MHz,;
4、Memory Depth 32Mpts(Standard);
5、Waveform Capture Rate up to 30,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.SKU: UT21P02CSO -
Multimeters
Fluke 17B+ Digital Multimeter
Key features
- 600 V Cat III safety rating
- 50% bigger display with bright white backlight
- Over-voltage indicator
- Frequency and temperature measurement
- Voltage, resistance, continuity, capacitance
- Input terminal for ac and dc current measurements to 10 A current
- Diode test, data hold
SKU: n/a -
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
There are no reviews yet.