JAKEMY precision screwdriver bits apply to household appliances such as eyeglass, camera, radio, computer, mobile phone, UAV, etc.
The dual dynamics are driving force for infinite creativity.
Out of stock
₨8,766 ₨10,200
Out of stock
CompareJAKEMY precision screwdriver bits apply to household appliances such as eyeglass, camera, radio, computer, mobile phone, UAV, etc.
The dual dynamics are driving force for infinite creativity.
Weight | 0.5 kg |
---|---|
Dimensions | 24 × 10 × 3 cm |
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
Specifications | ||
Model | UTP3305C | |
Output voltage | 0~30V (CH1/CH2) | |
Output current | 0~5A (CH1/CH2) | |
Output power | 315W | |
Load regulation | Voltage | <0.01%+5mV |
Current | <0.1%+10mA | |
Line regulation | Voltage | <0.01%+3mV |
Current | <0.1%+3mA | |
Resolution | Voltage | 10mV |
Current | 1mA | |
Accuracy (25℃±5℃) | Voltage | <0.5%+20mV |
Current | <0.5%+10mA | |
Ripple (20Hz~20MHz) | Voltage | ≤2mVrms |
Current | ≤3mArms | |
Output temperature coefficient |
Voltage | ≤150ppm |
Current | ≤150ppm | |
Voltage rise delay | ≤100ms (10% rated load) | |
Parallel/Series load regulation | ≤0.1%+0.1V | |
CH3 output features | Voltage | 5V |
Current | 3A | |
Voltage accuracy | ±50mV | |
Load regulation | ±50mV | |
Interfaces | USB Device, RS-232 | |
General Characteristics | ||
Power | AC 100V/120V/220V/230V±10%, 50Hz/60Hz | |
Display | 4 windows, LED | |
Product net weight | 9.1kg | |
Product size | 260mm x 176mm x 317mm | |
Standard accessories | USB and RS-232 interface cables, output cables | |
Standard individual packing | Carton box | |
Standard quantity per carton | 1pcs | |
Standard carton measurement | 440mm x 388mm x 295mm | |
Standard carton gross weight | 10kg |
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.
Parameters |
|
Rated voltage | AC220V±10% 50Hz |
Power of complete machine | 25W |
Operating environment | 0~40℃ relative humidity<80% |
Storage temperature | -20~80℃ relative humidity<80% |
Dimensions of the machine body | 27*14*22cm |
Weight | 1.9KG |
Performance parameters | |
Output voltage | Adjustable continuously within 0~15V |
Output current | Adjustable continuously within 0~1A (current limitation adjustment when above 0.2A) |
Output power | 15W |
Source effect | ≤1mV |
Load effect | ≤0.33% |
Ripple noise | ≤3mVrms(5Hz ~ 1MHz)/≤3mArms |
Display accuracy | 0.1V/0.1A/1mA |
Protection mode | Over-current, short circuit, over-temperature protection |
Dissipation mode | Air cooling |
Specifications | A61 |
Measurement range | -40℃~250℃ (-40℉~482℉) |
Accuracy | ±1℃ (-20℃≤T<100℃) |
±2℃ (T<-20℃; T≥100℃) | |
±2℉ (-4℉≤T<212℉) | |
±4℉ (T<-4℉; T≥212℉) | |
Minimum measuring depth | 12mm |
Sensor | NTC |
Stabilization time | 20s |
Resolution | 0.1℃ (0.1℉) |
Power | 3V button cell×1 (CR1632) |
Battery duration | 12h |
Operating temperature | 0℃~40℃ (32℉~104℉) |
Storage temperature | -20℃~60℃ (-4℉~140℉) |
Operating humidity | <RH80% (No condensable) |
General Characterisitics | |
Power | 3V battery (CR1632) |
Display | 26.6mm x 10.6mm |
Product color | White and grey |
Product net weight | 50.8g |
Product size | 190mm x 29.5mm x 15.5mm |
Standard accessories | Battery |
Standard individual packing | Blister, English manual |
Standard quantity per carton | 40pcs |
Standard carton measurement | 520mm x 210mm x 280mm |
Standard carton gross weight | 5kg |
There are no reviews yet.