RF-DA9 Multi Function Disassembly blade


Compare

Multi Function Disassembly blade

Category:

Brand

RF4

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “RF-DA9 Multi Function Disassembly blade”

There are no reviews yet.

  • YIHUA 936 Soldering Station

    0 out of 5
    (0)

    Application Scope


    1. Production lines for electronic products , suitable for desoldering of small solder joints ,components.
      2. Repair industry for moblie phone.
      3. SMD components requiring the highest precision
    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • Pride Cutter Plier 6″ With Rubber Grip Handle

    0 out of 5
    (0)

    Pride Cutter Plier 6″ With Rubber Grip Handle

    SKU: n/a
  • UT206A+

    0 out of 5
    (0)

    1. 1000A AC current measurement
    2. 1000V AC/DC voltage measurement
    3. 600A inrush current measurement (UT206A+)
    4. Temperature (UT206A+)
    5. NCV (UT206A+)
    6. ACV frequency 10Hz~10kHz
    7. Jaw opening: 45mm
    8. Resistance / capacitance / frequency measurement
    9. Auto range / backlight / low battery indication
    10. Continuity / diode / duty cycle
    11. MAX/MIN
    12. Data hold / flashlight / relative mode
    13. Auto power off
    14. CAT II 1000V/CAT III 600V

    SKU: n/a
  • UT572 Advanced Earth Resistance Tester

    0 out of 5
    (0)
    UT572 is for measuring earth resistance and soil resistivity. It can automatically check interface connection and detect  interference  voltage/frequency, with data hold and indication functions. It can perform 2/3/4-wire measurements for different on-site  applications, such as power equipment wiring and lightning protection equipment.
    SKU: n/a
  • UT-L 17 Test Leads

    0 out of 5
    (0)
    SKU: n/a