Model:947-I
Power supply voltage:110V 60HZ/220V 50HZ
Power : ≤35W/45W/60W
Working temperature :0-40℃
Welding head ground resistance :<2Ω
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. Energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
₨1,450 ₨1,679
Model:947-I
Power supply voltage:110V 60HZ/220V 50HZ
Power : ≤35W/45W/60W
Working temperature :0-40℃
Welding head ground resistance :<2Ω
Weight | 0.2 kg |
---|---|
Dimensions | 27 × 7 × 7 cm |
Description | |
Certificates | CE, RoHS |
Transmitter | |
Port flashing | √ |
Wire tracking | √ |
Line alignment | √ |
Open-short test | 10kΩ |
Polarity test | √ |
Operating time | >8 hours |
Receiver | |
Wire tracking | RJ11>3000m; RJ45>100m |
NCV function | √ |
Headset jack | 3.5mm |
Low battery indication | √ |
Operating time | >5 hours |
GENERAL CHARACTERISTICS | |
Power | 1050mAh rechargeable lithium battery |
Product net weight | Transmitter: around 95g; Receiver: around 127g |
Product size | Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm |
Standard accessories | USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual |
Standard individual packing | Gift box, carrying bag |
Standard quantity per carton | 20pcs |
Standard carton measurement | 480mm x 370mm x 325mm |
Standard carton gross weight | About 10kg |
Specifications | LM50 |
Display type | EBTN |
Display size | 2.0-inches |
Range | 50m |
Min. display unit | 0.001m |
Measurement units | m/ft/in |
Measurement basis | front/rear |
Accuracy | ±(2mm+5 x 10-5D) |
Laser class | 2 |
Laser type | 630~670nm, ﹤1mW |
Features | |
Single measurement | √ |
Continuous measurement | √ |
Max/Min/Area | √ |
Volume | √ |
Pythagoras | √ |
Add/Subtract | √ |
Data storage | 20 groups |
Auto power off | 3 minutes without operation |
Auto laser off | 30s without operation |
Auto backlight off | 10s without operation |
Audio indication | √ |
Battery status display | √ |
Storage temperature | -20℃~70℃ |
Operating temperature | 0℃~40℃ |
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.
Advantages of thermal imager detection:
1. Intuitive, efficient and convenient, making users directly “see” the temperature variation.
2. Thermal condition of different locations for comprehensive analysis, providing more information for judgment
3. Avoiding judgment errors, reducing labor costs, and discovering poor heat dissipation and hidden trouble points
4. PC software for data analysis and report output
parameters | |||
Rated voltage | AC 220V±10% 50Hz | ||
power | 720W±10%(Max) | ||
300℃ Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 250W±10% | ||
Working environment | 0~40℃ relative humidity<80% | ||
Storage environment | -20~80℃ relative humidity<80% | ||
Dimensions | 255*188*125mm | ||
Weight | 5.11KG | ||
Parts parameters | Hot air gun | Soldering iron | |
Operating Voltage | AC 220V±10% 50Hz | AC 26V±10% 50Hz | |
Output power | 550W | 75W | |
Temperature range | 100℃~480℃ | 200℃~480℃ | |
Air Supply Mode | Diaphragm pump | — | |
Air Flow | 28L/min(MAX) | — | |
Temperature Stability | ±1℃ (Static) | ±1℃ (Static) | |
Display Mode | LCD display | LCD display | |
Calibration Mode | The PID digital program
proofreading |
The PID digital program
proofreading |
|
PID Temperature Calibration Cycle | rapidly 20ms | high-speed 100ms | |
Heating Core | Ceramic columned heating element. | Imported heater | |
Standard nozzles/tips | (3mm,5mm,8mm,10mm,13mm)
5PCS nozzles |
B | |
Tip ground impedance | — | <2Ω | |
Tip of ground voltage | — | <2mV |
There are no reviews yet.